准格尔FDJ-120气动金属锯

商品介绍：

·FDJ-120型风动切开锯适用于风险的作业环境，可在较高温的环境下作业，无火花，在湿润的环境中无漏电风险，是一款功能牢靠、安全型及效率极高的抱负风动东西之一。广泛用于采矿、石化、修建等职业。

·使用井下压风管道体系作为动力源。重量轻，易带着；构造科学，便于作业。

·可迅速切开管道、电缆、角钢、构造钢、U型钢、链条、锚杆、锚索等。

·锢金属钢合金超级锯条，耐高温、耐冲突、运用寿数长。十分适用于锯割不锈钢、镍基合金、铁、铜、铝、玻璃、塑料、木材等。

 技术参数：

使用方法：
  1、了解所需切割的材料。
  2、确保牢固固定了所需切割的材料，防止其移动。
  3、电源接上时，用手指按压阀杆，然后开始切割。
  4、用锯的重量来控制切割压力。对于较软的材料来说，这样的重量已经足够。过多的压力会降低锯片的速度。对于较硬的材料，可以通过加压的方式来降低锯片的转动速度。切割是保持锯笔直。锯片的任何扭曲或歪斜都可能降低其使用寿命。（注意：避开切割后可能掉落的碎片。切割即将完成时，切勿使锯碰到您的身体、工件或附近的其它人员。）
  5、下次切割开始前，锯片必须保持运动状态。电动锯时，锯片不能接触任何表面。
  6、更换锯片前，务必断开电源力。
  7、顺时针转动调整手柄以便释放锯片导杆上的张力。然后释放侧面板的锁以便打开侧面板。然后从驱动轮上取下锯片并将其从锯带导杆上松开。
为了安全作业需要注意以下几点：
   1、用锯的重量来控制切割压力。对于较软的材料来说，这样的重量已经足够。过多的压力会降低锯片的速度。对于较硬的材料，可以通过加压的方式来降低锯片的转动速度。切割是保持锯笔直。锯片的任何扭曲或歪斜都可能降低其使用寿命
  2、关闭电源时，释放阀杆。
  3、更换锯片前，务必断开电源。
  4、顺时针转动调整手柄以便释放锯片导杆上的张力。然后释放侧面板的锁以便打开侧面板。然后从驱动轮上取下锯片并将其从锯带导杆上松开。
  5、下次切割开始前，锯片必须保持运动状态。电动锯时，锯片不能接触任何表面。
  6、了解所需切割的材料。
  7、确保牢固固定了所需切割的材料，防止其移动。
  8、接电源时，用手指按压阀杆，然后开始切割。
  9、断开电源时，关闭电源软管阀。断开前，先打开电源阀给软管减压

联系人金经理电话13934240041
山西万泽锦达质量过硬做的就是口碑没毛病欢迎各位老铁致电咨询

Introduction of pneumatic hand held cutting saw
1, understand the material needed to cut, if necessary to reduce the speed of rotation of the saw blade by reducing the pressure of the air.
2, ensure that the required cutting material is firmly fixed to prevent its movement.
3. When pneumatic air motor is operated, the stem is pressed with the finger, and then the cutting is started.
4, use the weight of the saw to control the cutting pressure. This weight is enough for softer materials. Too much pressure can reduce the speed of the saw blade. For harder materials, the speed of rotation of the saw blade can be reduced by pressure. The cutting is to keep the saws straight. Any twist or skew of the sawblade may reduce its service life.
5. When the air motor is closed, the stem is released.
6. The saw blade must remain moving before the next cutting begins. The saw blade can't contact any surface when a pneumatic saw.
7. When the air hose is disconnected, the air hose valve is closed. Before disconnecting, open the air valve and decompress the hose. Yuanhui District FDJ-120/ portable cutting saw
8. Before replacing the saw, be sure to disconnect the air hose and push the stem to release the pressure of Madane.
9, adjust the handle clockwise to release the tension on the sawing guide rod. Then release the lock of the side panel so as to open the side panel. Then remove the blade from the drive wheel and release it from the sawing guide rod. We don't promise unrealistic theories to customers, bragging, and exaggerating. But it can always be on the path of innovation, because the market gives us the answer, and the customer has given us approval.