产品详情
长期供应瑞士EMS PPA GV-6H 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
☆PPA强度、韧度和硬度优越性能，以及其良好的耐热件，耐化学性及抗开裂能力
☆PPA由于高温和高湿环境下仍能保持强度和硬度，可在传统的尼龙和聚酯所无法随的就用中替换金属
☆PPA塑料还具有优越的表面光泽性。可以对其进行着色而避免了表面喷涂，从而有助于降低表面划痕和刮痕的明显程度。
☆PPA塑料还具有良好的可加工性，并允许短的注塑循环时间
与PA46相比:
√PPA具有比PA46更好的CTI/耐电弧能和红外同流能力；
√PPA具有比PA46更好的耐化学性；
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in3 | ISO 1183 |
| Water Absorption | 1.1 % | 1.1 % | ISO 62 |
| Moisture Absorption | 0.600 % | 0.600 % | ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 |
| Linear Mold Shrinkage, Transverse | 0.0030 cm/cm | 0.0030 in/in | ISO 294-4, 2577 |
| Mechanical Properties | Metric | English | Comments |
| Ball Indentation Hardness | 130 MPa | 18900 psi | conditioned; ISO 2039-1 |
| Tensile Strength at Break | 140 MPa | 20300 psi | conditioned; ISO 527-1/-2 |
| 150 MPa | 21800 psi | dry; ISO 527-1/-2 | |
| Elongation at Break | 3.5 % | 3.5 % | dry; ISO 527-1/-2 |
| 4.0 % | 4.0 % | conditioned; ISO 527-1/-2 | |
| Tensile Modulus | 13.0 GPa | 1890 ksi | conditioned; ISO 527-1/-2 |
| 15.0 GPa | 2180 ksi | dry; ISO 527-1/-2 | |
| Charpy Impact Unnotched | 6.00 J/cm2 | 28.6 ft-lb/in2 | conditioned; ISO 179/1eU |
|
6.00 J/cm2 @Temperature 30.0 °C |
28.6 ft-lb/in2 @Temperature 86.0 °F |
conditioned; ISO 179/1eU | |
| Charpy Impact, Notched | 1.30 J/cm2 | 6.19 ft-lb/in2 | conditioned; ISO 179/1eA |
|
0.800 J/cm2 @Temperature 30.0 °C |
3.81 ft-lb/in2 @Temperature 86.0 °F |
conditioned; ISO 179/1eU | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 10000 ohm-cm | 10000 ohm-cm | conditioned; IEC 60093 |
| Surface Resistance | 50 ohm | 50 ohm | IEC 60093 |
PC (polycarbonate # bulletproof glue) /GV-3430/ Japan Teijin
Uses: other
Characteristic note: Type: high flame retardant type
Important beters: density: 1.46 g/cm3, water absorption: 0.12% molding shrinkage: 0.4% tensile strength: 118 MPa, elongation at break: 2.5% bending strength: 157 MPa bending modulus: 7410 MPa hardness: 93
Manufacturer: Japan Teijin chemical company
PC (polycarbonate # bulletproof glue) /G-3420/ Japan Teijin
Uses: other
Characteristic note: Type: standard type
Important beters: density: 1.34 g/cm3 water absorption: 0.14% molding shrinkage: 0.2% notched impact strength: 14 tensile strength: 105 MPa elongation at break: 4.5% bending strength: 157 MPa bending modulus: 5400 MPa hardness: 91
Manufacturer: Japan Teijin chemical company
PC (polycarbonate # bulletproof glue) /G-3430/ Japan Teijin
Uses: other
Characteristic note: Type: standard type
Important beters: density: 1.43 g/cm3, water absorption: 0.12% molding shrinkage: 0.11% tensile strength: 126 MPa, elongation at break: 3.5% bending strength: 186 MPa bending modulus: 7260 MPa hardness: 93
Manufacturer: Japan Teijin chemical company
PC (polycarbonate # bulletproof glue) /GN-3410/ Japan Teijin
Uses: other
Characteristic note: Type: flame retardant type
Important beters: density: 1.28 g/cm3 water absorption: 0.16% molding shrinkage: 0.4% notched impact strength: 7 tensile strength: 82 MPa elongation at break: 4.5% bending strength: 127 MPa bending modulus: 3530 MPa hardness: 86
Manufacturer: Japan Teijin chemical company
PC (polycarbonate # bulletproof glue) /LV-2250Z/ Japan Teijin
Uses: other
Characteristic note: Type: weather resistant type
Important beters: density: 1.2 g/cm3 water absorption: 0.2% molding shrinkage: 0.6% notched impact strength: 90 tensile strength: 80 MPa elongation at break: 140% bending strength: 92 MPa bending modulus: 2230 MPa hardness: 77
Manufacturer: Japan Teijin chemical company
PC (polycarbonate # bulletproof glue) /LS2/ Elizabeth Foundation (GE)
Uses: other
Important beters: melt flow rate: 11 g/10min density: 1.2 g/cm3 absorption rate: 0.15% notched impact strength: 800 tensile strength: 62 MPa elongation: 130% bending strength: 96 MPa flexural modulus of 2343 MPa hot debation temperature: 132 degrees
Manufacturer: SABIC innovative plastics (GE)
PC (polycarbonate # bulletproof glue) /500R-131/ Elizabeth Foundation (GE)
Uses: other
Important beters: water absorption: 0.12% notched impact strength: 107 tensile strength: 55 MPa, elongation at break: 15% bending strength: 103 MPa bending modulus: 3445 MPa hardness: 124, hot debation temperature: 146 DEG C
Manufacturer: SABIC innovative plastics (GE)
PC (polycarbonate # bulletproof glue) /C10G/ Beijing Han Lun
Uses: other
Important beters: melt flow rate: 15 g/10min density: 1.27 g/cm3 notched impact strength: 120 tensile strength: 65 MPa, elongation at break: 11% bending strength: 100 MPa bending modulus: 3500 MPa, hot debation temperature: 145 DEG C
Manufacturer: Beijing Han Da Da Technology & Trade Co., Ltd.
PC (polycarbonate # bulletproof glue) /C30G/ Beijing Han Lun
Uses: other
Important beters: melt flow rate: 14 g/10min density: 1.47 g/cm3 notched impact strength: 90 tensile strength: 100 MPa, elongation at break: 9% bending strength: 150 MPa bending modulus: 6500 MPa, hot debation temperature: 152 DEG C
Manufacturer: Beijing Han Da Da Technology & Trade Co., Ltd.
PC (polycarbonate # bulletproof glue) /303-15/ DuPont dow
Uses: other
Remarks: features: release agent and anti UV agent
Important beters: melt flow rate: 15 g/10min density: 1.2 g/cm3 absorption rate: 0.15% notched impact strength: 850 tensile strength: 71 MPa elongation: 150% bending strength: 96 MPa flexural modulus: 2410 MPa hardness: 72 VEKA softening point of 148 DEG C:
Manufacturer: Dow DuPont Co
