产品详情
\r
\r<\/p>\r
\r 真诚为您提供：<\/span>塑料粉碎机，强力粉碎机，快速粉碎机，慢速静音粉碎机，强力静音粉碎机，中速机边粉碎机，粉碎回收机，<\/span>TPE/TPR/TPU<\/span>等弹性体粉碎机，<\/span>TPU<\/span>胶水粉碎机，边料粉碎机，橡胶粉碎机，电路板粉碎机，塑料瓶粉碎机，饮料瓶粉碎机，鞋材粉碎机，片刀<\/span>/<\/span>爪刀型粉碎机等。<\/span><\/span> \r<\/p>\r \r \r 三创牌低温粉碎机<\/span>,<\/span>热敏材料专用粉碎机<\/span>,<\/span>热熔性塑料低温粉碎机<\/span>,<\/span>热粘性软胶料粉碎机<\/span>,<\/span>抗粘连胶料粉碎机：<\/span><\/span> \r<\/p>\r \r 本系列粉碎机,<\/span>是专门针对TPE,TPR,TPU,PU,EVA,<\/span>纯PP,<\/span>生橡胶,<\/span>热熔性弹性体等一系列不耐高温的塑料和橡胶料设计制造.<\/span>其主要特点是让物料在5-20<\/span>度的低温环境中粉碎成颗料.<\/span><\/span> \r<\/p>\r \r 弹性体物料在生产和生活中的应用越来越广泛,<\/span>因其具有一般塑料无法提供的稳定性和耐温及密封效果,<\/span>但弹性体物料的成本也相对普通塑料高出很多.<\/span><\/span> \r<\/p>\r \r 大部分热熔性物料是弹性体料,<\/span>橡胶料.<\/span>它们在粉碎中遇到的问题为:<\/span><\/span> \r<\/p>\r \r 1.<\/span>弹性体物料硬度不高,<\/span>物性较软,<\/span>无法像ABS<\/span>等脆性物料一样,<\/span>通过撞击或挤压的方式粉碎<\/span> \r<\/p>\r \r 2.<\/span>热熔性物料的耐温性差,<\/span>大部分物料在超过70<\/span>度的环境下,<\/span>会呈现出熔溶装态,<\/span>甚至有些物料(<\/span>如高纯度PP)<\/span>在30<\/span>多度**熔化,<\/span>并开始互相粘连.<\/span><\/span> \r<\/p>\r \r 3.<\/span>大部分弹性体在高频率的摩擦后,<\/span>会产生静电,<\/span>致使物料粉碎成颗料后下料不顺畅.<\/span><\/span> \r<\/p>\r \r 针对热敏性材料的以上特性,<\/span>三创牌低温粉碎机经过针对性的设计和改良,<\/span>达成以下功能:<\/span><\/span> \r<\/p>\r \r 1.<\/span>刀具材用2<\/span>种不同性质的钢材:<\/span>刀口部分采用高硬度的高速钢,<\/span>大幅度地提升刀口的切削粉碎能力(<\/span>比SKD-11<\/span>材质硬度更高).<\/span>使切削一次完成,<\/span>果断不边带.<\/span>在高削切削的同时,<\/span>辟免了因一次切削不到位造成的多次切削和磨擦.<\/span><\/span> \r<\/p>\r \r 2.<\/span>刀体采用硬度偏低的钢材,<\/span>增强其韧性,<\/span>大大提高了刀具的抗冲击力,<\/span>使大块物料的破碎力得到保证.<\/span><\/span> \r<\/p>\r \r 3.<\/span>粉碎室内采用低温设计,<\/span>使物料可以在5-20<\/span>度的低温环境下粉碎,<\/span>避免因温度升高使物料熔化而产生粘连<\/span> \r<\/p>\r \r 4.<\/span>.<\/span>筛网经特殊处理,<\/span>减少因静电影响物料落下,<\/span>保证下料顺畅.<\/span><\/span> \r<\/p>\r \r \r 三创牌硅胶<\/span>,TPU<\/span>，<\/span>TPR<\/span>，<\/span>TPE<\/span>，<\/span>PU<\/span>，<\/span>EVA,<\/span>等弹性体专用粉碎机：<\/span><\/span> \r<\/p>\r \r 硅胶<\/span>, TPU<\/span>，<\/span>TPR<\/span>，<\/span>TPE<\/span>，<\/span>PU<\/span>，橡胶等较软的塑料，无法经冲击破碎，只能依靠刀具的锋利刀口进行切削粉碎<\/span>.<\/span>同时因为此类塑料非常容易因为磨擦升温而产生粘连性。三创牌软胶专用粉碎机针对弹性体硅胶等的特殊性<\/span>,<\/span>设计**的刀轴转速<\/span>;<\/span>并搭配特制材制的刀具，切削力优异<\/span>;<\/span>还在机身箱体上加装冷却水循环，保持机身在低温下运行，降低物料的粘连性，使下料更顺畅，提高粉碎效果。<\/span> \r<\/p>\r \r 该机型应用于硅胶制品的粉碎时,<\/span>可同时用于粉碎较硬的PC,POM,PA<\/span>等薄件产品.<\/span><\/span> \r<\/p>\r \r \r \r <\/span> \r<\/p>\r \r 厚重的大块料粉碎应选用重型强力粉碎机,<\/span>其优势特点如下:<\/span><\/span> \r<\/p>\r \r 1.<\/span>刀架与中轴为液压装配成型,<\/span>中轴上无任何焊接点,<\/span>避免因烧焊致使中轴变形.<\/span>中轴同心度高,<\/span>使用寿命长,<\/span>运转稳定.<\/span><\/span> \r<\/p>\r \r 2.<\/span>刀架与轴套均为线割加工,<\/span>公差控制**,<\/span>与中轴尺寸配合精良,<\/span>有效减少运转磨损.<\/span>延长机器使用寿命,<\/span>减少维修.<\/span><\/span> \r<\/p>\r \r 3.<\/span>刀具材质为SKH2<\/span>镶钢或SKD-11<\/span>全钢.SKH2<\/span>硬度高,<\/span>切削性,<\/span>耐磨性能优异,<\/span>适用于软胶,<\/span>弹性体,<\/span>膜类较薄产品的粉碎.<\/span>而SKD-11<\/span>硬度适中,<\/span>耐磨性和抗冲击能力强,<\/span>适用于大块硬质胶头料,<\/span>耐磨材料的粉碎<\/span> \r<\/p>\r \r 4.<\/span>爪刀型采用SKD-11<\/span>全钢材质,<\/span>动刀采用双面刀刃,<\/span>减少刀具研磨次数,<\/span>增加刀具使用寿命.<\/span><\/span> \r<\/p>\r \r 5.<\/span>爪刀型刀片安装在刀架爪子下方,<\/span>有效地提高了刀片的耐冲击能力,<\/span>破碎大块厚胶料时,<\/span>更轻松快速<\/span> \r<\/p>\r \r 平面抛光打磨细致全面,<\/span>不留砂点,<\/span>避免新机粉碎时造成污染.<\/span><\/span> \r<\/p>\r \r \r
\r<\/p>\r
\r<\/p>\r
\r<\/span>例如游泳镜产品的粉碎,<\/span>边框和带子是非常软的硅胶或TPR,TPU<\/span>材料,<\/span>但是镜片是比较硬而且耐磨的PC<\/span>材料,<\/span>这两者用这款粉碎机都可以得到很好的处理.<\/span>因为这款机型的刀具材质为高速钢,<\/span>硬度在58-61<\/span>之间,<\/span>对软胶有非常优异的切削性能,<\/span>配合合理的中轴转速和经过处理的下料筛网,<\/span>针对软胶如硅胶,<\/span>橡胶,<\/span>弹性体等粉碎效果非常好,<\/span>切削面平滑,<\/span>速度快效率高,<\/span>能长时间连续工作,<\/span>不粘连,<\/span>下料顺畅.<\/span>同时因为这款刀具的耐磨性非常好,<\/span>针对硬胶的粉碎也有很高的效率,<\/span>长时间工作能减少50%<\/span>的磨刀次数<\/span> \r<\/p>\r
\r<\/span>需要注意的是这款机型,<\/span>不适用于厚重的大料块粉碎,<\/span>只适用于薄件产品.<\/span><\/span> \r<\/p>\r
\r<\/p>\r
\r <\/span> \r<\/p>
