产品详情
登车桥是用于叉车与货车之间的搭桥设备，方便装卸货物。最大动负载：<\/span>6T <\/span>，最大静负载：<\/span>6T <\/span>，最大宽度：<\/span>2M <\/span>，最大长度：<\/span>4M<\/span>。分类很多，一般分为移动登车桥和固定登车桥。常规：长度<\/span>11M,<\/span>宽度<\/span>2.1M<\/span>实心轮胎。<\/span><\/span> <\/p> 移动式登车桥<\/span> <\/p> <\/span> 用于现场无装卸货平台或需要流动装卸货物的场所。如果物流现场没有装卸货平台，作为补救措施，移动式登车桥是非常适用的方案之一，移动式登车桥相当于一个移动的钢结斜坡，叉车同样能直接驶入卡车车厢内部进行批量装卸作业。只需单人操作，不需动力电源，即可实现货物的安全快速装卸。<\/span> <\/p> <\/p> 可牵引式移动式登车桥是一种可以利用通过叉车、牵引车等牵引的一种移动式登车桥，是结合平板拖车牵引架技术研制而成，前段加可向两侧旋转重型万向轮及可拆卸牵引杆，在需要移动时可以将万向轮旋转至下端装上牵引杆，可简单方便的实现牵引移动。<\/span> <\/p> 产品特点：<\/span> <\/p> 登车桥前端配置行走万向轮机构及牵引机构，登车桥移动异常方便；<\/span> <\/p> 主梁采用国标高强度<\/span>25#<\/span>型钢，质量稳定可靠；<\/span><\/span> <\/p> 加长的上平台长度，叉车作业时有足够空间调整装卸货角度，防止溜坡现象产生，操作更加安全；<\/span> <\/p> 可牵引移动式登车桥<\/span> <\/p> <\/span> <\/span><\/span>采用大吨位支腿及两个辅助支腿，支承能力强，车桥稳固耐用；<\/span>前桥采用一体式设计；<\/span>桥面部分设置防滑网状，具有很好的防滑功能；<\/span>车桥设计结构紧凑、牢固，防止动载荷后产生车桥变弄现象；<\/span>载荷：<\/span>6~12<\/span>吨。<\/span><\/span> <\/p> <\/span>移动式登车桥规格尺寸： （<\/span>mm<\/span>）桥长<\/span>—<\/span>10500mm(8000+2500) <\/span>桥宽<\/span>—<\/span>2000mm<\/span><\/span> <\/p> 变幅范围<\/span>—<\/span>1100<\/span>-<\/span>1580 <\/span><\/span>额定载荷：（<\/span>1<\/span>）<\/span>6T <\/span>（<\/span>2<\/span>）<\/span> 8T <\/span>（<\/span>3<\/span>）<\/span>10T<\/span><\/span> <\/p> 全幅手摇次数 <\/span>—<\/span>50<\/span>次 高度可调节范围：<\/span>1000<\/span>-<\/span>1800<\/span><\/span><\/span> <\/p> DCQY6-0.9<\/span>尺寸：变幅范围：<\/span>900mm <\/span>桥长：<\/span>10500mm <\/span>桥宽：<\/span>2000mm <\/span>全幅手摇次数<\/span>:<\/span>50<\/span><\/span><\/span> <\/p> 选用材质<\/span> <\/p> 1<\/span>、主体支架：采用特制异型钢管。<\/span> <\/p> 2<\/span>、台面材料：台面采用<\/span>8mm<\/span>防滑网。<\/span><\/span> <\/p> 3<\/span>、油 缸：济南产高精度耐磨油缸。<\/span> <\/p> 4<\/span>、轮 胎：高强度耐负荷高压轮胎。<\/span> <\/p> 5<\/span>、液 压 油：<\/span>32<\/span>号抗磨液压油（日本华尔兹）<\/span><\/span> <\/p> 6<\/span>、液压油管：高压双层钢网橡胶管（沈阳橡胶四厂）<\/span> <\/p> 7<\/span>、配置的刹车块（可有效防止货车装卸时登车桥移位）。<\/span> <\/p> 8<\/span>、采用手摇液压泵作动力，（勿需外接动力电源即可轻松实现登车桥的高度调节）<\/span> <\/p> 9<\/span>、可调节长度的索链能方便地钩住货车，使登车桥与货车始终紧密贴合<\/span>.<\/span><\/span> <\/p> 舌板：<\/span>16mm<\/span>×<\/span>4mm<\/span>花纹板<\/span><\/span> <\/p> 该系列机是集四轮移动与二轮牵引式于一身，采用汽车底盘做平台底架。利用汽车发动机做动力，即可行驶又可驱动升降平台，广泛用于城建、油田、交通、市政等行业。<\/span> <\/p> 市政建设维护、路灯照明、公路设施维护、工程抢修、园林修剪、多个加油站的维护等。<\/span> <\/p> 以适应厂区内外的高空作业。 广泛应用于宾馆、大厦、机场、车站、体育场、车间、仓库等场所的高空作业；也可作为临时性的高空照明、广告宣传等。<\/span> <\/p> <\/span> <\/p>
<\/span><\/span><\/p> <\/span>
<\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p>
<\/span> <\/p><\/span>
<\/p> <\/span>
