产品详情
\r9FQ40—20B<\/span>型粉碎机<\/span>
\r<\/span>该机是根据用户要求开发设计的一种通用型粉碎机。它是<\/span>9FQ40—20<\/span>型的改进型，在结构上吸收了各种粉碎机的优点，克服了原机型粉碎藤杆类物料难喂进料的不足，结构设计更合理，优点更突出。同时粉碎玉米等颗料和谷壳、秕谷等壳类物料，榨油后油饼生产效率更高，操作更方便，使用更安全，配用功率小，该机选用<\/span>7.5---15 KW<\/span>电机或者<\/span>12---15<\/span>马力柴油机做动力，通用性能好，也适用于以藤杆类物料为主的山区，以颗粒、壳类料为主的平原、丘陵地区，是广大饲料加工户（厂）更为理想的饲料机械。<\/span> <\/span>
\r<\/span>
\r<\/span>一、主要技术参数<\/span> <\/span>
\r<\/span>主轴转速：<\/span>3300—3770R/Min <\/span>
\r<\/span>配套动力：<\/span>7.5—15 kw<\/span>
\r<\/span>配套动力：柴油机<\/span>12----15<\/span>马力<\/span>
\r<\/span>电机型号：<\/span>Y132M-4<\/span>或<\/span>Y160M-4 <\/span>
\r<\/span>转子直径：<\/span>400MM<\/span>
\r<\/span>筛片宽度：<\/span>200MM<\/span>
\r<\/span>风机叶轮直径：<\/span>300MM<\/span>
\r<\/span>锤片数量：<\/span>8---12<\/span>片<\/span> <\/span>
\r<\/span>轴 承：<\/span>308<\/span>型<\/span>2<\/span>个<\/span> <\/span>
\r<\/span>三角皮带：<\/span>B<\/span>型<\/span> <\/span>
\r<\/span>外型尺寸：<\/span>900<\/span>×<\/span>885<\/span>×<\/span>810mm<\/span>（不包括输料管）<\/span>
\r<\/span>整机质量：<\/span>170Kg <\/span>
\r<\/span>
\r<\/span>二、主要性能指标<\/span> <\/span>
\r<\/span>藤杆（φ<\/span>1.00mm<\/span>）<\/span>120-150Kg/h <\/span>
\r<\/span>谷壳（φ<\/span>1.00mm<\/span>）<\/span>220-260Kg/h <\/span>
\r<\/span>玉米（φ<\/span>2.00mm<\/span>）<\/span>750-1100 Kg/h<\/span>
\r<\/span>还可以粉碎大豆、高粱、秕谷、稻草、苕藤、花生壳、干酒糟、大麦、小麦、蚕豆、豌豆、花生杆、玉米棒子、玉米杆、芝麻杆、高粱杆、黄豆杆、皮革的边角余料、药材、打羽绒、碎甘蔗、麦芽**、重晶石等等颗粒类、茎杆类、壳类等物料，本机在正常工作状态下，用筛孔直径为<\/span>2MM<\/span>的筛片，含水率在<\/span>14%<\/span>以下。<\/span>
\r<\/span>（注：<\/span>9FQ40-20<\/span>型有<\/span>A<\/span>、<\/span>B<\/span>两种机型，<\/span>B<\/span>型为带颗粒料斗；筛片可以根据所粉碎的物料不同，更换筛片，孔径分别为：<\/span>0.6MM<\/span>、<\/span>0.8MM<\/span>、<\/span>1.0MM<\/span>、<\/span>1.2MM<\/span>、<\/span>1.5MM<\/span>、<\/span>2.0MM<\/span>、<\/span>3MM<\/span>、<\/span>4MM<\/span>、<\/span>5MM<\/span>、<\/span>6MM<\/span>、<\/span>7MM<\/span>、<\/span>8MM<\/span>、<\/span>9MM<\/span>、<\/span>10MM<\/span>等等，不管多大孔径的筛片都可以制造。）<\/span><\/span> \r<\/p>\r\r\r \r<\/div>\r<\/div>\r<\/div>
