产品详情
\r产品概述：\r<\/p>\r
\r本产品适用于修补4mm2<\/span><\/span>—<\/span>185mm2<\/span><\/span>的电缆线压号之用，主要号有：<\/span>0<\/span><\/span>、<\/span>1<\/span><\/span>、<\/span>2<\/span><\/span>、<\/span>3<\/span><\/span>、<\/span>4<\/span><\/span>、<\/span>5<\/span><\/span>、<\/span>6<\/span><\/span>、<\/span>7<\/span><\/span>、<\/span>8<\/span><\/span>、<\/span>9<\/span><\/span>、<\/span>M<\/span><\/span>、<\/span>X<\/span><\/span>、<\/span>+<\/span><\/span>、—、＃等一系列数字、字母组成，可任意重复使用，本产品寿命长，不易损坏，结构简单牢靠，操作方便，是煤矿企业**压号电缆维修设备之一。<\/span> GSYHJ<\/span><\/span>电缆压号机**研制生产的产品，本机主要由自动拨号字头、电气、仪表、温控、红外线加热系统组成。该设备在工作中移动方便，易于操作，压号速度快、时间短。字头数码采用优质镍铬铝合金冶炼加工而成，根据电缆的平方、长度和编码任意排列，压出的数码，字体清晰、大方、不易磨损，其中关键是压出的数码深浅适度，符合煤矿对电缆的安全使用要求。<\/span><\/span> \r<\/p>\r \r使用说明<\/span><\/span>
\r<\/span><\/span> <\/span>1<\/span><\/span>、打开包装箱、检查运输途中是否有损坏部件和仪表，如果完好无损即可进行使用。<\/span><\/span>
\r<\/span><\/span> <\/span>2<\/span><\/span>、接通<\/span>220v<\/span><\/span>电源，接好接地线。<\/span><\/span>
\r<\/span><\/span> <\/span>3<\/span><\/span>、调整所需要编号、平方、长度字轮。<\/span><\/span>
\r<\/span><\/span> <\/span>4<\/span><\/span>、根据电缆截面积、调整电缆可调整滑块。<\/span><\/span>
\r<\/span><\/span> <\/span>5<\/span><\/span>、将电缆放入调好的字轮上，可将压线器压紧<\/span>(<\/span><\/span>有手拧丝杆、手拧转轮、手动液压和全自动液压<\/span>)<\/span><\/span>都必须压紧电缆方可工作。<\/span><\/span>
\r<\/span><\/span> <\/span>6<\/span><\/span>、打开电源开关，将温度调到需要的温度即可<\/span>(140—180<\/span><\/span>度之间<\/span>)<\/span><\/span>。<\/span><\/span>
\r<\/span><\/span> <\/span>7<\/span><\/span>、待温度升到一定程度时，自动停电，有电铃可报警，没电铃的可人工看守，这时切记再次加压，效果为**。<\/span><\/span>
\r<\/span><\/span> <\/span>8<\/span><\/span>、待温度降到<\/span>60—40<\/span><\/span>℃<\/span>时<\/span>(<\/span><\/span>拧开支臂手轮或液压自动阀取出电缆即可<\/span>)<\/span><\/span>。<\/span><\/span>\r<\/p><\/div>
