产品详情
加工定制是
品牌秦华
型号sl
种类氧化膜
性能超高频
材料氧化膜
制作工艺膜式非线绕型
外形管形
允许偏差±1%
温度系数ptc
额定功率5kww
功率特性大功率
频率特性超高频
产品性质军工
标称阻值100r
货号8
是否跨境货源否
应用领域电工电气
展开
sl型大功率氧化膜水冷电阻器
点我去除广告
sl type high frequency large power water cooled resistors
主要特点:小体积、大功率、高频性能优越。广泛用于金属件热处理设备的高频电源中和广播电视发射机设备的假负载。
chief characteristic: small volume. large power. high frequency is excellent. they are used extensively high frequency power supply equipment of bl thermal treatment and false loads of the sender for the radio and bevision.
技术标准/technology standard:
1. gjb3017--97《膜式高压电阻器总规范》
2. qjb/qh1619--2007《ry-gdl型高频大功率氧化膜电阻器详细规范》
外形图/contour drawing:
型号type
ratedpower(w)
阻值范围
resistance
range(?)
阻值允差
resistance
tolerance(%)
温度系数temperature
coefficient(×10/k)(ppm)
外形尺寸
contour dimensions (φd×l)(mm)
备注remark
sl-i
5000
5-1000
±5-±10
≤±400(25-125)℃
46×(182±1)
sl-ii
10000
10-3000
46×(400±2)
sl-iii
33000
10-10000
90×(860±3)
串联in serise
注意:1.电阻器只准垂直安装,进水口在下;出水口在上。
2.电阻器每消耗1kw功率,水流量应不小于1公升/min。但降功率使用时,就其水流量而言:5kw电阻器应不低于5公升/min; 10-20kw电阻器应不低于10公升/min; 25kw电阻器应不低于15公升/min。
3.如果采用循环水冷系统,其出水必须经过冷却处理方可使用,应当使用去离子水作为冷却介质。
4.超出上表所列技术参数,可按用户要求协议供货。
remarks:1.the resistor only allowed the vertical installation,water inlet,outlet in.
2.resistor per 1kw power consumption,water should not be less than 1liter per minute.but reduced power use,in terms of its water:5kw resistor not less than 5 liters per minute;10-20kw resistor not less than 10 liters per minute;25kw resistor not less than 15 liters per minute.
3. if using circulating water cooling system, the water must be treated with cooling before use.
4.go beyond the afore cited scope,we can provide the products according to the user's requirements.
联系:易经理 电话:18717226362同微信
品牌秦华
型号sl
种类氧化膜
性能超高频
材料氧化膜
制作工艺膜式非线绕型
外形管形
允许偏差±1%
温度系数ptc
额定功率5kww
功率特性大功率
频率特性超高频
产品性质军工
标称阻值100r
货号8
是否跨境货源否
应用领域电工电气
展开
sl型大功率氧化膜水冷电阻器
点我去除广告
sl type high frequency large power water cooled resistors
主要特点:小体积、大功率、高频性能优越。广泛用于金属件热处理设备的高频电源中和广播电视发射机设备的假负载。
chief characteristic: small volume. large power. high frequency is excellent. they are used extensively high frequency power supply equipment of bl thermal treatment and false loads of the sender for the radio and bevision.
技术标准/technology standard:
1. gjb3017--97《膜式高压电阻器总规范》
2. qjb/qh1619--2007《ry-gdl型高频大功率氧化膜电阻器详细规范》
外形图/contour drawing:
型号type
ratedpower(w)
阻值范围
resistance
range(?)
阻值允差
resistance
tolerance(%)
温度系数temperature
coefficient(×10/k)(ppm)
外形尺寸
contour dimensions (φd×l)(mm)
备注remark
sl-i
5000
5-1000
±5-±10
≤±400(25-125)℃
46×(182±1)
sl-ii
10000
10-3000
46×(400±2)
sl-iii
33000
10-10000
90×(860±3)
串联in serise
注意:1.电阻器只准垂直安装,进水口在下;出水口在上。
2.电阻器每消耗1kw功率,水流量应不小于1公升/min。但降功率使用时,就其水流量而言:5kw电阻器应不低于5公升/min; 10-20kw电阻器应不低于10公升/min; 25kw电阻器应不低于15公升/min。
3.如果采用循环水冷系统,其出水必须经过冷却处理方可使用,应当使用去离子水作为冷却介质。
4.超出上表所列技术参数,可按用户要求协议供货。
remarks:1.the resistor only allowed the vertical installation,water inlet,outlet in.
2.resistor per 1kw power consumption,water should not be less than 1liter per minute.but reduced power use,in terms of its water:5kw resistor not less than 5 liters per minute;10-20kw resistor not less than 10 liters per minute;25kw resistor not less than 15 liters per minute.
3. if using circulating water cooling system, the water must be treated with cooling before use.
4.go beyond the afore cited scope,we can provide the products according to the user's requirements.
联系:易经理 电话:18717226362同微信


