产品详情
<\/p><\/span><\/b>
1<\/b>、产品特点<\/span><\/span><\/b> <\/p> 本机主要利用巴氏杀菌，适用于啤酒、番茄酱等产品的杀菌、冷却，还可作为单独的冷却设备使用。本机采用热水循环喷淋杀菌，温水预冷，冷水冷却等多段式处理方式，杀菌温度和时间任意可调，自动化程度高。本机由进出罐输送带机构、运转网带系统、机架、喷淋系统、水泵水箱、蒸汽加热自动控制系统和主传动机构电控箱组成。<\/span><\/span> <\/p> <\/span> <\/p> 2<\/span><\/b>、设备原理<\/span><\/span><\/b> <\/p> 需要杀菌的实罐由进罐输送带输入送到大网带上，由网带输入到杀菌区对罐头进行喷淋杀菌。杀菌采用蒸汽加热的热水喷淋杀菌**温度可达<\/span>92<\/span>℃，杀菌温度可由温度自动控制仪任意设置，只要在参数设置栏中设置一组上限值与下限值，即可由自动控制系统全程自动控制。被加热过的高温水从杀菌机上部的喷淋水管中经喷头喷出，喷头使高温水雾化喷出。完成杀菌后的实罐进入到预冷区预冷，预冷后再进入到冷却区。冷却后的出罐温度一般保持在<\/span>32~35<\/span>℃，即能避免析出凝结水，又不致影响罐内液体的品质。<\/span><\/span> <\/p> <\/span> <\/p> 3<\/span><\/b>、设备结构<\/span><\/span><\/b> <\/p> 杀菌机的链板采用<\/span>5997<\/span>型塑料网带，由上海产减速机<\/span>0.55kw<\/span>驱动，电机变频控制，网带线速度可由调速电机任意控制及设定。机架采用不锈钢矩型管，箱体采用<\/span>304<\/span>钢板，箱体盖四周采用水密封结构。电器采用进口气动元件采用亚德克。<\/span><\/span> <\/p> <\/span> <\/p> 4<\/span><\/b>、主要技术参数<\/span><\/span><\/b> <\/p> 1<\/span>）外形尺寸<\/span> <\/p> <\/span>a. <\/span>设备总长度：<\/span>17000mm<\/span>（不包括两端瓶带及操作台）<\/span> <\/p> <\/span>b. <\/span>设备总宽度：<\/span>3600mm<\/span>（不包括瓶带及外部管路）<\/span> <\/p> <\/span>c. <\/span>设备总高度：<\/span>1700mm<\/span>（不包括外部管路）<\/span> <\/p> d. <\/span>设备输送带高度：<\/span>H=1200mm<\/span> <\/p> 2<\/span>）生产能力：额定值：<\/span>300<\/span>罐<\/span>/<\/span>分钟<\/span> <\/p> 3<\/span>）包装物高度：≤<\/span>200mm<\/span>。可通过物体的极限高度：≤<\/span>250mm<\/span> <\/p> 4<\/span>）总功率：<\/span>20.25KW<\/span> <\/p> 5<\/span>）控制电压：直流<\/span>24<\/span>伏<\/span> <\/p> 6<\/span>）工作电压：<\/span>380<\/span>伏<\/span> <\/p> 7<\/span>）自来水压力：<\/span>2<\/span>～<\/span>4kgf/cm2 <\/span> <\/p> 8<\/span>）蒸汽压力：<\/span>4<\/span>～<\/span>6kgf/cm2<\/span> <\/p> 9) <\/span>压缩空气压力：<\/span>2<\/span>～<\/span>4kgf/cm2<\/span> <\/p> 10<\/span>）设备重量：<\/span>13.5<\/span>吨<\/span> <\/p> <\/span> <\/p> 5<\/span><\/b>、主要配置：<\/span><\/span><\/b> <\/p> 主体框架材料：<\/span>304<\/span>不锈钢<\/span> <\/p> 厚度：<\/span>3mm <\/span>（根据国标）<\/span> <\/p> 主传动轴：<\/span>40<\/span>钢<\/span> <\/p> 蒸汽管道：不锈钢<\/span> <\/p> 主减速机：上海<\/span> <\/p> 输送链网：美国原料<\/span> <\/p> 采用隧道式网带连续输送喷淋杀菌，主机采用变频调速；<\/span> <\/p> 整机除网带、主被动轮外均采用不锈钢制作，表面亮化处理；<\/span> <\/p> 喷淋采用不锈钢方管，水帘状大面积喷淋，输入式，拆卸清洗方便，杀菌无死角；<\/span> <\/p> 水泵采用中国南方特种泵业；<\/span> <\/p> 调节薄膜采用杭州富阳江南；<\/span> <\/p> 各温区温度自动控制，温度显示，温差≤±<\/span>1<\/span>℃<\/span>，保持稳定的PU<\/span>值；<\/span> <\/p> PLC<\/span>、电器元件均采用进口；<\/span> <\/p> 耗水量：2.5<\/span>吨/<\/span>小时 ； 耗蒸汽量：1.2<\/span>吨/<\/span>小时；<\/span> <\/p> 压缩空气耗量：20m3<\/sup><\/span>/h <\/span>；<\/span> <\/p> 共七个温区；<\/span> <\/p> <\/p><\/div>
