精品荣誉推出CDHD-20/24III-A5船用充电电源@欢迎咨询

一、概述：

I. General

CDHD是应用高频 PWM 脉宽调制技术，以 IGBT、场效应功率管和脉宽调制集成控制器为主要部件而构成的开关电源式多功能充电电源。它省去了笨重又有噪音的工频变压器，使得整机重量只有可控硅充电电源的四分之一，3KW的CDHD充电电源整机重量8公斤。另外电源还提供有多个功能模块选配，整机采用智能冷却，即使在最高温的机舱内也能保证电源可靠工作。CDHD系列电源满足中国船级社的各种规范规则，符合船用电气及规范的基本标准。

CDHD applies Pulse Width Modulation (PWM) technology, being multiple-function switching charging power supply with IGBT, MOSFET and PWM integrated controller as main parts. Heavy power frequency transber with noise is not used, which makes the weight of the whole set be 1/4 of silicon controlled charger. The whole set of 3KW CDHD charging power supply weighs 8 kilograms. The power supply also provides several function modules for matching. The whole set adopts smart cooling process, therefore the power supply could work reliably in engine room with the highest temperature. CDHD series power supply meets all the specifications and rules of China Classification Society and basic standards of marine electric standards.

产品型号编制方法

Method for Product Model Designation

本充电电源为三阶段自动充电电源（恒流均衡充电-恒压均衡充 电-浮充电）如下图所示。对电瓶充电的全过程是先进入均衡 充电，自动完成先恒流，后恒压，待电流降到接近零时均衡充 电完成，令其（手动或自动）转入“浮充”，以涓流维持电瓶在 满充状态。其充电详细过程如下：

Three stages of the automatic charging power supply are constant-current equalizing charge, constant-voltage equalizing charge and floating charge as shown in the following figure. The whole process of battery charge is to enter the mode of equalizing charge first and automatically finishes the constant-current and then constant-voltage charge. The equalizing charge is finished when the current is near zero, and the mode should be transferred into “Floating charge” (manually or automatically). The trickle maintains the status of full charge. The detailed process of charge is as follows:

以24V铅酸蓄电池为例，过程是：接好电池，开启后，充电电源软启动，电压从21.6V(电池放电下限值)开始上升，充电电流逐步增大到额定恒流值，充电电源进入恒流充电过程，此后充电电压逐渐升至28.2V（均充电压值），此恒流充电过程一般情况下约需1～2小时；然后，充电电源进入均衡充电过程，在此过程中，充电电流逐渐缓慢下降，电源退出恒流工作，此时电源电压不变，进入到恒压均衡充电状态，此充电过程约需4～6小时，随着电流的进一步减小到额定电流的十分之一时，电源自动判断为电池已充好，电源自动转为浮充阶段，即输出电压将为26.4V,充电电流则进一步减小甚至为零，在没有外部变化情况下，此后电源一直维持这种状态，补充电池的自耗电。采用这种充电方式能够较快、均衡的对电池组进行充电，充满后充电电源能自动转换到浮充，维持电池正常电压避免出现电池过充，从而实现无人值守充电工作方式。

Take the 24V lead acid battery as an example: the process is that when the batteries are connected and turned on, soft starting of the charging power supply is finished; voltage rises from 21.6V (lower limit of battery discharge); current increase steadily to rated value of constant current; charging power supply enters into process of constant-current charge; the charge voltage gradually rises to 28.2V (average voltage charge voltage), and the constant current charge usually lasts for 1-2 hours. Then the charging power supply enters the process of equalizing charge, and in the process the current gradually falls; the constant-current work of power supply ends. The power supply keeps being unchanged, and enters into the status of constant-voltage equalizing charge; the process lasts for 4-6 hours; as the current further falls to be 1/10 of the rated current value, the battery is automatically regarded as fully charged, and the power supply enters the stage of floating charge, i.e. the output voltage will be 26.4V and the charge current further falls to zero; then the power supply keeps the status to supply the self-consumption. The manners enable fast and equalizing charge of battery, and the charging power supply automatically switches into status of floating charge to maintain the usual voltage of battery and avoid overcharging, thus the b of charge without people’s supervision is realized.

备注：对不同种类的蓄电池其充电方式和充电电压是不同的。

Notes: Charge bs and voltage of various types of battery are different.

本充电电源的电原理方框图如下示：Block diagram of electric principle of the charging power supply is as follows:

二、技术指标

II. Technical Index

1. 输入电压 ： AC110V±15%；AC220V±20%；AC380V±20%；AC440V±15%(每种输入都可以选择单相或三相)

1 Input voltage: AC110V±15%; AC220V±20%; AC380V±20%; AC440V±15% (single phase or three phase could be selected for each type of b voltage)

2. 稳压精度：≤1%

2 Voltage-stabilizing precision: ≤1%

3 恒流精度：≤1%

3 Constant-current precision: ≤1%

4 输出电压纹波：Vp-p≤1%

4 Output voltage ripple: Vp-p≤1%

5 输出额定电压V0：DC12V,24V,48V（可选）

5 Rated output voltage (VO): DC12V, 24V, 48V (Optional)

浮充电压：2.2VOXN（N为电池节数）；均充电压：2.35VOXN（N为电池节数）

Float charge voltage: 2.2VOXN (N refers to number of batteries); average charge voltage: 2.35VOXN (N refers to number of batteries)

12V电池N为6，24V电池N为12，48V电池N为24

N=6 for 12V battery; N=12 for 24V battery; N=24 for 48V battery

6 输出额定电流IO：10A，20A,，30A，40A，60A（可选）

6 Rated output current IO:10A， 20A,30A,40A,60A(Optional)

7 工作效率：≥85%（额定测试）

7 Working efficiency: ≥85% (rating test)

8 工作时间：长期

8 Working period: Long term

9 冷却方式：风冷

9 Cooling b: Air cooling

10 防护等级： IP20或IP22、IP44以及客户需求的各种防护等级

10 rotection grade: IP20 or IP22, IP44 and all protection grades necessary for customers

11 产品符合GB7061-98《船用低压开关设备和控制设备装置通用技术条件》和GB/T14548-93《船用半导体变流器通用技术条件》的相关规定，符合《钢质海船入级规范 》的有关规定。

11 products meet related provisions of GB7061-98 General Specification for Marine Low Voltage Switch Equipment and Control Equipment Device, GB/T14548-93 General Specification for Marine Semiconductor Converters and Rules for Classification for Sea-going Steel Ships.

12 保护功能：输入过欠压保护（可选）；输出过欠压保护；输出过流及短路保护；过热保护

12 ection function: Input over-voltage and under-voltage protection (optional); output over-voltage and under-voltage protection; output over-current and short-circuit protection; overheat protection