产品详情
参考標准：GB13511-1999，GB/T14214-1998，QB2659-2004，QB2457-1999，行業標准等主要用于測定鏡架的彈簧鉸鏈具有一定的耐用性，可承受一定次數的開合活動而保持原狀，目的是檢測彈簧鉸鏈的彈力變化情況
1.使用前請先確認電壓是否正確，在將電源插頭插於電源插座上。
2.將测试眼镜夹持装置。
3.計數器之設定：當電源接上後，其銀幕上會顯示上下兩排數位；上排為計時用；下排為設定用。例如：按設定鍵1，則銀幕下排之個位數會閃爍，再每按一次數字會增加。按設定鍵2，則十位元數字會閃爍，每按一次則數字會增加，以此類推。
4.將眼鏡架固定於夾具座上，調整其所需之測試角度。
5.調整動作之速度。
6.以上動作完成後即可按鍵，啟動後機臺做到所設定之數位後會自動停止，停止後如要繼續動作，按計數器之歸零鍵在按啟動鍵即可。
7.5组装置测试
8.220V电源
Reference standard: GB13511-1999, GB/T14214-1998, QB2659-2004, QB2457-1999, the industry standard etc. Mainly used for the determination of the spring hinge frame has certain durability, can bear a certain number of opening and closing activities and keep the original state, the purpose is to test the spring hinge elasticity changes
Before using, please check if the voltage is correct and plug the power plug into the power socket.
Keep your glasses in gear.
The setting of the counter: when the power supply is connected, the screen will display two rows of digits. To be used for timing; The next line is set for use. For example, by setting the key 1, the number of rows in the bottom row of the screen flicker and the number increases every time. By setting the key 2, the tens digit will be flashing, the number will increase each time, and so on.
Place the frames on the fixtures and adjust the test Angle.
Adjust the speed of your bs.
6. After completion of the above bs can be key, start the machine set digital do after will automatically stop, stop if you want to continue after the b, according to the counter of the zero key in press start button.
Unit 7.5 test
8.220 V power supply
