PPS 1140L6 SD3002

长期供应美国泰科纳 PPS 1140L6 SD3002价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。

“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商

本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！

欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600

---

  

介绍———————— 

产品用途

　　PPS可广泛运用于：

　　电子：电视机、电脑上的高压元件、外壳、插座、接线柱，电动机的起动线圈、叶片，电刷托架及转子绝缘部件，接触开关，继电器，连接器，线圈骨架，微调电机部件，三极管封装材料等。

　　电器：空调配件、微波炉，暖风机，电熨斗，吹风机，烫发器，咖哪壶，电饭煲，电蒸锅，电水壶，千衣机等零部件，复印机、照相机、计算机零部件。

　　汽车：适用于排气再循环阀及水泵叶轮，点火器，汽化器，加热器，温控器，排气调节阀，灯光反射器.灯座，釉承、油底壳螺丝，汽车发电机骨架和支架，化油器部件，传感器，整流器等。

　　机械：用作耐高温轴承，泵，阀门，活塞，精密齿轮，法兰和垫片，螺栓，螺帽，导管，喷雾器，喷油嘴，仪器仪表零件等。

　　化工：用于制作耐酸碱的阀门、管道、管件、阀片、垫片及潜水泵或叶轮等耐腐蚀零部件。化学反应罐、槽、斧内衬，输油管道内衬，化工过滤筛网或滤板。

　　环保：耐高温除尘虑袋及其龙骨防腐涂层，高温耐腐蚀滤布，废水处理设备部件及防腐涂层，环保设备洗涤塔叶片及相关部件。

Physical Properties	Metric	English	Comments
Density	1.94 g/cc	0.0701 lb/in³	ASTM D792
Water Absorption	0.020 % @Time 86400 sec	0.020 % @Time 24.0 hour	ISO 62
Linear Mold Shrinkage, Flow	0.0020 cm/cm @Thickness 3.18 mm	0.0020 in/in @Thickness 0.125 in
Linear Mold Shrinkage, Transverse	0.0040 cm/cm @Thickness 3.20 mm	0.0040 in/in @Thickness 0.126 in	ASTM D955
Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	101	101	ASTM D785
Hardness, Rockwell R	119	119	ASTM D785
Tensile Strength	159 MPa	23100 psi	ASTM D638
Tensile Stress	165 MPa	23900 psi	ISO 527-2
Elongation at Break	1.1 %	1.1 %	ISO 527-2
	1.1 %	1.1 %	ASTM D638
Flexural Strength	241 MPa	35000 psi	ASTM D790
	255 MPa	37000 psi	ISO 178

 

其他型号参数与生产商——————————

PMMA (organic glass acrylic PMMA # | /ZD23/ Evonik Degussa)
Use: other
Features note: non crystalline, high impact resistance, heat resistance, good stain resistance, contact food, high resistance to stress crack, medium mobility, high strength, weather resistance
Important beters: melt flow rate: 3.1 g/10min density: 1.15 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.3% notched impact strength: 29.7 tensile strength: 44.1 MPa elongation: 20% bending strength: 68.9 MPa flexural modulus: 1790 MPa hardness: 44 VEKA softening point of 108 DEG C heat debation temperature of 85 DEG C: light transmittance: 85%
Manufacturer: Germany Evonik Degussa company
PMMA (PMMA # organic glass acrylic Lucite |) /CP-81/ (Taiwan)
Use: other
Characteristic note: drying conditions: 70-85 C mold temperature: 70-90 C material temperature: 180-230 C injection pressure: 700-1400kg/cm2 annealing conditions 2-4 hours: 65-80
Important beters: melt flow rate: 1.8 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.004% notched impact strength: 0.4 tensile strength: 67 MPa flexural strength: 108 MPa flexural modulus: 2923 MPa hardness: 95 VEKA softening point of 107 DEG C heat debation temperature of 98 DEG C: light transmittance: 92%
Manufacturer: Lu Cai (Taiwan) Company
PMMA (organic glass acrylic PMMA # | /df33 7H/ Evonik Degussa)
Purpose: automotive components
Note: the characteristics of High? Hardness? Impact modified high strength?? luster, good surface finish?? good liquidity? Scratch? Weatherproof clarity, high perbance is good?
Important beters: melt flow rate: 0.9 g/10min density: 1.18 g/cm3 notched impact strength: 17 VEKA softening point: 102 degrees hot debation temperature: 101 degrees light transmittance: 69%
Manufacturer: Germany Evonik Degussa company
PMMA (organic glass acrylic PMMA # |) /CA-82/ Plaskolite West
Uses: household electrical appliances parts, automotive components, lighting lamps
Features notes: high molecular weight, good processing stability, heat resistance of medium, low odor to no, good release perbance
Important beters: melt flow rate: 2.5 g/10min density: 1.19 g/cm3 tensile strength: 67.6 MPa elongation at break: 3.4% bending strength: 118 MPa VEKA softening point: 102 degrees hot debation temperature: 94.4 degrees light transmittance: 92%
Manufacturers: the United States West Plaskolite company
PMMA (organic glass acrylic PMMA # | /ZK-6/ Evonik Degussa)
Use: other
Features: high impact resistance, medium heat resistance, good stain resistance, contact food, high stress crack resistance, good fluidity, high strength, weather resistance, high transparency, RoHs compliance.
Important beters: melt flow rate: 1.7 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.4% notched impact strength: 58.7 tensile strength: 43.4 MPa elongation: 55% bending strength: 59.3 MPa flexural modulus: 1520 MPa hardness: 40 VEKA softening point of 93.9 DEG C heat debation temperature of 90 DEG C: light transmittance: 91.5%
Manufacturer: Germany Evonik Degussa company
PMMA (organic glass acrylic PMMA # | /ZK-D/ Evonik Degussa)
Use: other
Features: high impact resistance, medium heat resistance, good stain resistance, contact food, high stress crack resistance, good fluidity, high strength, weather resistance, transparency, RoHs compliance.
Important beters: melt flow rate: 5.8 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.3% notched impact strength: 58.7 tensile strength: 44.1 MPa elongation: 40% bending strength: 64.8 MPa flexural modulus: 1590 MPa hardness: 33 VEKA softening point of 93.9 DEG C heat debation temperature of 87.8 DEG C: light transmittance: 91.5%
Manufacturer: Germany Evonik Degussa company
PMMA (organic glass acrylic PMMA # |) /CP-927/ Plaskolite West
Use: other
Note: the characteristics of good dimensional stability, good insulation, impact resistance, good machinability, cutting, moderate liquidity, good chemical resistance, resistance to climate impact perbance is good, low to high definition, no smell
Important beters: melt flow rate: 4.3 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength: 53 tensile strength: 50.3 MPa elongation: 20% bending strength: 75.8 MPa flexural modulus: 2140 MPa hardness: 53 VEKA softening point of 104 DEG C heat debation temperature of 85 DEG C: light transmittance: 91%
Manufacturers: the United States West Plaskolite company
PMMA (organic glass acrylic PMMA # | /ZK-F/ Evonik Degussa)
Use: other
Characteristic note: non crystalline, high impact resistance, high heat resistance, good stain resistance, contact with food, stress crack resistance, high fluidity, good strength, weather resistance, transparency, RoHs, FDA compliance
Important beters: melt flow rate: 13 g/10min density: 1.17 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.3% notched impact strength: 40 tensile strength: 56.5 MPa elongation: 25% bending strength: 68.9 MPa flexural modulus: 2000 MPa hardness: 65 VEKA softening point of 97.8 DEG C heat debation temperature of 91.1 DEG C: light transmittance: 92%
Manufacturer: Germany Evonik Degussa company
PMMA (organic glass acrylic PMMA # | /ZK-M/ Evonik Degussa)
Use: other
Features: high impact resistance, good heat resistance, good stain resistance, good contact with food, high stress crack resistance, good fluidity, high strength, weather resistance, high transparency, RoHs, FDA compliance
Important beters: melt flow rate: 3.5 g/10min density: 1.18 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.3% notched impact strength: 45.4 tensile strength: 58.6 MPa elongation: 30% bending strength: 89.6 MPa flexural modulus: 2210 MPa hardness: 68 VEKA softening point of 98.9 DEG C heat debation temperature of 91.1 DEG C: light transmittance: 91