PPS 1141L4 63000

长期供应美国泰科纳 PPS 1141L4 63000价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。

“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商

本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！

欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600

---

  

介绍———————— 

产品用途

　　PPS可广泛运用于：

　　电子：电视机、电脑上的高压元件、外壳、插座、接线柱，电动机的起动线圈、叶片，电刷托架及转子绝缘部件，接触开关，继电器，连接器，线圈骨架，微调电机部件，三极管封装材料等。

　　电器：空调配件、微波炉，暖风机，电熨斗，吹风机，烫发器，咖哪壶，电饭煲，电蒸锅，电水壶，千衣机等零部件，复印机、照相机、计算机零部件。

　　汽车：适用于排气再循环阀及水泵叶轮，点火器，汽化器，加热器，温控器，排气调节阀，灯光反射器.灯座，釉承、油底壳螺丝，汽车发电机骨架和支架，化油器部件，传感器，整流器等。

　　机械：用作耐高温轴承，泵，阀门，活塞，精密齿轮，法兰和垫片，螺栓，螺帽，导管，喷雾器，喷油嘴，仪器仪表零件等。

　　化工：用于制作耐酸碱的阀门、管道、管件、阀片、垫片及潜水泵或叶轮等耐腐蚀零部件。化学反应罐、槽、斧内衬，输油管道内衬，化工过滤筛网或滤板。

　　环保：耐高温除尘虑袋及其龙骨防腐涂层，高温耐腐蚀滤布，废水处理设备部件及防腐涂层，环保设备洗涤塔叶片及相关部件。

Physical Properties	Metric	English	Comments
Density	1.94 g/cc	0.0701 lb/in³	ASTM D792
Water Absorption	0.020 % @Time 86400 sec	0.020 % @Time 24.0 hour	ISO 62
Linear Mold Shrinkage, Flow	0.0020 cm/cm @Thickness 3.18 mm	0.0020 in/in @Thickness 0.125 in
Linear Mold Shrinkage, Transverse	0.0040 cm/cm @Thickness 3.20 mm	0.0040 in/in @Thickness 0.126 in	ASTM D955
Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	101	101	ASTM D785
Hardness, Rockwell R	119	119	ASTM D785
Tensile Strength	159 MPa	23100 psi	ASTM D638
Tensile Stress	165 MPa	23900 psi	ISO 527-2
Elongation at Break	1.1 %	1.1 %	ISO 527-2
	1.1 %	1.1 %	ASTM D638
Flexural Strength	241 MPa	35000 psi	ASTM D790
	255 MPa	37000 psi	ISO 178

 

其他型号参数与生产商——————————

PMMA (organic glass acrylic PMMA # |) /CP-924/ Plaskolite West
Use: other
Features note: dimensional stability, good insulation, good impact resistance, good workability, cutting, high mobility, good chemical resistance, good weather resistance, low odor, high definition
Important beters: melt flow rate: 6.4 g/10min density: 1.17 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength: 48 tensile strength: 58.6 MPa elongation: 12% bending strength: 86.2 MPa flexural modulus: 2550 MPa hardness: 68 VEKA softening point of 104 DEG C heat debation temperature of 87.8 DEG C: light transmittance: 91%
Manufacturers: the United States West Plaskolite company
PMMA (organic glass acrylic PMMA # | /ZK-X/ Evonik Degussa)
Use: other
Features note: non crystalline, high impact resistance, high heat resistance, good coloring, can contact food, good resistance to rupture, good mobility, good strength, weathering, high transparency, RoHs, FDA compliance
Important beters: melt flow rate: 1 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.4% notched impact strength: 45.4 tensile strength: 64.1 MPa elongation: 25% bending strength: 103 MPa flexural modulus: 2410 MPa hardness: 70 VEKA softening point of 110 DEG C heat debation temperature of 93.3 DEG C: light transmittance: 91.5%
Manufacturer: Germany Evonik Degussa company
PMMA (PMMA # organic glass acrylic Lucite |) /CP-924/ (Taiwan)
Use: other
Note: the characteristics of electrical insulation, good chemical resistance, good dimensional stability, good impact resistance, good processability, good weatherability, high definition, low flow, low to low to no smell, no taste, can be processed
Important beters: melt flow rate: 6.4 g/10min density: 1.17 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength: 48 tensile strength: 58.6 MPa elongation: 12% bending strength: 86.2 MPa flexural modulus: 2550 MPa hardness: 68 VEKA softening point of 104 DEG C heat debation temperature of 87.8 DEG C: light transmittance: 91%
Manufacturer: Lu Cai (Taiwan) Company
PMMA (PMMA # organic glass acrylic /ShinkoLite-P IR H-30/ |) MITSUBISHI rayon America
Use: other
Features: transparent, high gloss, good impact resistance, very low odor or no, weather resistance, high heat resistance, good dimensional stability, good mobility
Important beters: melt flow rate: 1.7 g/10min density: 1.17 g/cm3 absorption rate: 0.4% molding shrinkage rate: 0.3% notched impact strength: 19.6 tensile strength: 53 MPa elongation: 80% bending strength: 83.4 MPa flexural modulus: 2260 MPa VEKA softening point debation temperature: 96 degrees 111 degrees of thermal transmittance: 92%
Manufacturers: MITSUBISHI Li Yang American company
PMMA (organic glass acrylic PMMA # |) /CP-1000I/ Plaskolite West
Use: other
Features note: dimensional stability, good insulation, good impact resistance, good workability, cutting, low mobility, good chemical resistance, good weather resistance, low odor, high definition
Important beters: melt flow rate: 2.7 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength: 64 tensile strength: 42.1 MPa elongation: 37% bending strength: 61.4 MPa flexural modulus: 1790 MPa hardness: 36 VEKA softening point of 99.4 DEG C heat debation temperature of 82.2 DEG C: light transmittance: 91%
Manufacturers: the United States West Plaskolite company
PMMA (PMMA # organic glass acrylic Lucite |) /CP-927/ (Taiwan)
Use: other
Note: the characteristics of electrical insulation, good chemical resistance, good dimensional stability, good impact resistance, good processability, good weatherability, high definition, low to low to no smell, no taste, can be processed, the flow of media
Important beters: melt flow rate: 4.3 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength: 53.4 tensile strength: 50.3 MPa elongation: 20% bending strength: 75.8 MPa flexural modulus: 2140 MPa hardness: 53 VEKA softening point of 104 DEG C heat debation temperature of 85 DEG C: light transmittance: 91%
Manufacturer: Lu Cai (Taiwan) Company
PMMA (organic glass acrylic PMMA # | /Polymer 375/ Evonik Degussa)
Use: other
Features note: radiation disinfection, good chemical resistance, good impact resistance, welding, high heat resistance, high strength, high clarity, can be bonded, can be used for ethylene oxide disinfection, in compliance with EC\FDA\USP detection
Important beters: melt flow rate: 2.1 g/10min density: 1.11 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.4% notched impact strength: 107 tensile strength: 48.3 MPa elongation: 28% bending strength: 75.8 MPa flexural modulus: 2410 MPa hardness: 45 VEKA softening point of 103 DEG C heat debation temperature of 85.6 DEG C: light transmittance: 86%
Manufacturer: Germany Evonik Degussa company
PMMA (organic glass acrylic PMMA # |) /CP-41/ Plaskolite West
Use: other
Note: the characteristics of good dimensional stability, good insulation, impact resistance, good processability, machinability, high mobility, good chemical resistance, resistance to climate impact good perbance, low to no odor, high definition, medium molecular weight
Important beters: melt flow rate: 25 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.5% notched impact strength: 16 tensile strength: 53.8 MPa elongation: 2.4% bending strength: 79.3 MPa flexural modulus: 2760 MPa hardness: 75 VEKA softening point of 90 DEG C heat debation temperature of 72.8 DEG C: light transmittance: 91%
Manufacturers: the United States West Plaskolite company
PMM(PMMA # organic glass acrylic /CP-927HF/ America Plaskolite West |)
Use: other
Features note: dimensional stability, good insulation, good impact resistance, good workability, cutting, high mobility, good chemical resistance, good weather resistance, low odor, high definition
Important beters: melt flow rate: 11 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength: 53 tensile strength: 50.3 MPa elongation: 18% bending strength: 75.8 MPa flexural modulus: 2140 MPa hardness: 53 VEKA softening point of 93.3 DEG C heat debation temperature of 77.8 DEG C: light transmittance: 91%
Manufacturers: the United States West Plaskolite company
PMMA (PMMA # organic glass acrylic Lucite |) /CP-10001/ (Taiwan)
Use: other
Note: the characteristics of electrical insulation, good chemical resistance, good impact resistance, good processability, good dimensional stability, good weatherability, high resolution, high flow, low to low to no smell, no taste, can be processed
Important beters: melt flow rate: 2.7 g/10min density: 1.16 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.6% notched impact strength: 64.1 tensile strength: 42.1 MPa elongation: 37% bending strength: 61.4 MPa flexural modulus: 1790 MPa hardness: 36 VEKA softening point of 99.4 DEG C heat debation temperature of 82.2 DEG C: light transmittance: 91%
Manufacturer: Lu Cai (Taiwan) Company