产品详情
长期供应台湾宝理 PPS E1140价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
产品用途
PPS可广泛运用于：
电子：电视机、电脑上的高压元件、外壳、插座、接线柱，电动机的起动线圈、叶片，电刷托架及转子绝缘部件，接触开关，继电器，连接器，线圈骨架，微调电机部件，三极管封装材料等。
电器：空调配件、微波炉，暖风机，电熨斗，吹风机，烫发器，咖哪壶，电饭煲，电蒸锅，电水壶，千衣机等零部件，复印机、照相机、计算机零部件。
汽车：适用于排气再循环阀及水泵叶轮，点火器，汽化器，加热器，温控器，排气调节阀，灯光反射器.灯座，釉承、油底壳螺丝，汽车发电机骨架和支架，化油器部件，传感器，整流器等。
机械：用作耐高温轴承，泵，阀门，活塞，精密齿轮，法兰和垫片，螺栓，螺帽，导管，喷雾器，喷油嘴，仪器仪表零件等。
化工：用于制作耐酸碱的阀门、管道、管件、阀片、垫片及潜水泵或叶轮等耐腐蚀零部件。化学反应罐、槽、斧内衬，输油管道内衬，化工过滤筛网或滤板。
环保：耐高温除尘虑袋及其龙骨防腐涂层，高温耐腐蚀滤布，废水处理设备部件及防腐涂层，环保设备洗涤塔叶片及相关部件。
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.94 g/cc | 0.0701 lb/in³ | ASTM D792 |
| Water Absorption |
0.020 % @Time 86400 sec |
0.020 % @Time 24.0 hour |
ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0020 cm/cm @Thickness 3.18 mm |
0.0020 in/in @Thickness 0.125 in |
|
| Linear Mold Shrinkage, Transverse |
0.0040 cm/cm @Thickness 3.20 mm |
0.0040 in/in @Thickness 0.126 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 101 | 101 | ASTM D785 |
| Hardness, Rockwell R | 119 | 119 | ASTM D785 |
| Tensile Strength | 159 MPa | 23100 psi | ASTM D638 |
| Tensile Stress | 165 MPa | 23900 psi | ISO 527-2 |
| Elongation at Break | 1.1 % | 1.1 % | ISO 527-2 |
| 1.1 % | 1.1 % | ASTM D638 | |
| Flexural Strength | 241 MPa | 35000 psi | ASTM D790 |
| 255 MPa | 37000 psi | ISO 178 | |
其他型号参数与生产商——————————
PMMA (organic glass acrylic PMMA # |) /CP-61/ Plaskolite WestUse: other
Note: the characteristics of good dimensional stability, insulation, impact resistance, good processability, good machinability, and good fluidity, good chemical resistance, weather resistance effect of good perbance, high heat resistance, low odor, non high definition, medium molecular weight
Important beters: melt flow rate: 5.8 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.5% notched impact strength: 21 tensile strength: 66.2 MPa elongation: 3.4% bending strength: 89.6 MPa flexural modulus: 3070 MPa hardness: 93 VEKA softening point of 102 DEG C heat debation temperature of 91.1 DEG C: light transmittance: 91%
Manufacturers: the United States West Plaskolite company
PMMA (organic glass acrylic PMMA # |) /CP-81/ Plaskolite West
Use: other
Note: the characteristics of good dimensional stability, high molecular weight, lubrication, insulation, impact resistance, good processability, good machinability, low liquidity, good chemical resistance, weather resistance effect of good perbance, high heat resistance, low to high definition, no smell
Important beters: melt flow rate: 2.3 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.5% notched impact strength: 21 tensile strength: 66.9 MPa elongation: 4% bending strength: 108 MPa flexural modulus: 2920 MPa hardness: 88 VEKA softening point of 107 DEG C heat debation temperature of 97.8 DEG C: light transmittance: 92%
Manufacturers: the United States West Plaskolite company
PMMA (PMMA # organic glass acrylic | denkikagaku) /TX-500R-301/
Use: other
Characteristics: with the same good transparency and organic glass, weather resistance, surface strength, but also more than the organic glass resin moisture absorption rate, a small proportion of the polymer and good bability. The resin can be used in injection molding, extrusion molding and other fields.
Important beters: melt flow rate: 1.7 g/10min density: 1.11 g/cm3 molding shrinkage rate: 0.004% tensile strength: 49 MPa flexural strength: 86 MPa flexural modulus: 2680 MPa hardness: 59 VEKA softening point of 90 DEG C heat debation temperature of 77 DEG C: light transmittance: 91%
Manufacturer: Japan electric chemical industry Co Ltd
PMMA (PMMA # organic glass acrylic | denkikagaku) /TX-100-300L/
Use: other
Characteristics: with the same good transparency and organic glass, weather resistance, surface strength, but also more than the organic glass resin moisture absorption rate, a small proportion of the polymer and good bability. The resin can be used in injection molding, extrusion molding and other fields.
Important beters: melt flow rate: 2 g/10min density: 1.12 g/cm3 molding shrinkage rate: 0.004% notched impact strength: 16 tensile strength: 69 MPa flexural strength: 108 MPa flexural modulus: 3430 MPa hardness: 98 VEKA softening point of 101 DEG C heat debation temperature of 89 DEG C: light transmittance: 92%
Manufacturer: Japan electric chemical industry Co Ltd
PMMA (PMMA # organic glass acrylic | denkikagaku) /TX-400-300L/
Use: other
Characteristics: with the same good transparency and organic glass, weather resistance, surface strength, but also more than the organic glass resin moisture absorption rate, a small proportion of the polymer and good bability. The resin can be used in injection molding, extrusion molding and other fields.
Important beters: melt flow rate: 1 g/10min density: 1.12 g/cm3 molding shrinkage rate: 0.004% notched impact strength: 18 tensile strength: 69 MPa flexural strength: 121 MPa flexural modulus: 3510 MPa hardness: 98 VEKA softening point of 103 DEG C heat debation temperature of 89 DEG C: light transmittance: 92%
Manufacturer: Japan electric chemical industry Co Ltd
PMMA (PMMA # organic glass acrylic /ShinkoLite-P IR H-70/ |) MITSUBISHI rayon America
Use: other
Features: transparent, high gloss, good impact resistance, very low or no smell, good chemical resistance, weather resistance, high heat resistance, good dimensional stability, good mobility
Important beters: melt flow rate: 0.7 g/10min density: 1.14 g/cm3 absorption rate: 0.4% molding shrinkage rate: 0.4% notched impact strength: 68.6 tensile strength: 32.4 MPa elongation: 90% bending strength: 45.1 MPa flexural modulus: 1270 MPa VEKA softening point debation temperature: 90 degrees 105 degrees of thermal transmittance: 92%
Manufacturers: MITSUBISHI Li Yang American company
PMMA (PMMA # | organic glass acrylic /ShinkoLite-P VH/ MITSUBISHI rayon America)
Use: other
Features: transparent, high gloss, good impact resistance, very low odor or no, good chemical resistance, weather resistance, high heat resistance, good size stability, good mobility, good toughness
Important beters: melt flow rate: 2 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.2% notched impact strength: 16.7 tensile strength: 72.6 MPa elongation: 5% bending strength: 108 MPa flexural modulus: 3140 MPa hardness: 100 VEKA softening point of 116 DEG C heat debation temperature of 102 DEG C: light transmittance: 93%
Manufacturers: MITSUBISHI Li Yang American company
PMMA (PMMA # | organic glass acrylic /ShinkoLite-P V/ MITSUBISHI rayon America)
Use: other
Features: transparent, high gloss, good impact resistance, very low or no smell, good chemical resistance, weather resistance, high heat resistance, good dimensional stability, good mobility
Important beters: melt flow rate: 2.5 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.2% notched impact strength: 15.7 tensile strength: 71.6 MPa elongation: 5% bending strength: 108 MPa flexural modulus: 3040 MPa hardness: 95 VEKA softening point of 107 DEG C heat debation temperature of 92.2 DEG C: light transmittance: 93%
Production plantPMMA (organic glass acrylic PMMA # |) /CP-86/ Plaskolite West
Use: other
Note: the characteristics of good dimensional stability, high molecular weight, good insulation, impact resistance, good processability, cutting, low liquidity, good chemical resistance, weather resistance effect of good perbance, high heat resistance, low odor, odor free to low to high definition, no
Important beters: melt flow rate: 1.4 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.5% notched impact strength: 21 tensile strength: 69.6 MPa elongation: 5.5% bending strength: 114 MPa flexural modulus: 2840 MPa hardness: 89 VEKA softening point of 113 DEG C heat debation temperature of 100 DEG C: light transmittance: 92%
Manufacturers: the United States West Plaskolite company
PMMA (PMMA # organic glass acrylic Lucite |) /CP-75/ (Taiwan)
Use: other
Note: the characteristics of electrical insulation, good chemical resistance, good impact resistance, good processability, good dimensional stability, good weatherability, high resolution, high heat resistance, low to low to no smell, no taste, can be processed, the flow of media, such as molecular weight
Important beters: melt flow rate: 3.4 g/10min density: 1.19 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.5% notched impact strength: 21.4 tensile strength: 71 MPa elongation: 4.2% bending strength: 113 MPa flexural modulus: 2850 MPa hardness: 95 VEKA softening point of 113 DEG C heat debation temperature of 100 DEG C: light transmittance: 92%
Manufacturer: Lu Cai (Taiwan) Company
