产品详情
长期供应日本旭化成 PPO 1950J价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
EVA (ethylene vinyl acetate copolymer (14-2) / /Y2022 #) Beijing organic
Purpose: film, foam
Important beters: density: 0.935 g/cm3 elongation at break: 720% hardness: 92 VEKA softening point: the content of filler at 70 degrees C
Manufacturer: Beijing organic chemical plant
EVA (ethylene vinyl acetate copolymer (18-3) / /Y2045 #) Beijing organic
Purpose: film, foam
Important beters: density: 0.94 g/cm3 elongation at break: 800% hardness: 90 VEKA softening point: the content of filler at 65 degrees C
Manufacturer: Beijing organic chemical plant
EVA (ethylene vinyl acetate copolymer (14-0.7) / /Y2005 #) Beijing organic
Usage: other
Important beters: density: 0.935 g/cm3 elongation at break: 620% hardness: 92 VEKA softening point: the content of filler at 75 degrees C
Manufacturer: Beijing organic chemical plant
EVA (ethylene vinyl acetate copolymer #) /V2524EX/ Germany BASF
Purpose: thin film
Important beters: melt flow rate: 0.5 g/10min density: 0.9245 g/cm3
Manufacturer: Basf Inc
EVA (ethylene vinyl acetate copolymer # /EF443/ Hyundai)
Usage: other
Important beters: melt flow rate: 1.1 g/10min density: tensile strength of 0.932 MPa: elongation at break of 21 g/cm3: 700% hardness: 42 VEKA softening point: the content of filler: 12%
Manufacturer: Korea Hyundai Petrochemical Company
