产品详情
长期供应沙伯基础 PPO PPX-7110价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
EVA (ethylene vinyl acetate copolymer #) /MQ 40/ of Italy
Usage: other
Features: high mobility and high elasticity
Important beters: melt flow rate: 12 g/10min tensile strength: 4 MPa bending modulus: 40 MPa hardness: VEKA softening point: 56 degrees of brittleness temperature: -80 C
Manufacturer: Italy Eni
EVA (ethylene vinyl acetate copolymer #) /HM-728/ Brazil Braskem
Purpose: thin film
Features: foam, good flexibility, high ESCR, medium molecular weight
Important beters: melt flow rate: 6 g/10min density: 0.95 g/cm3 hardness: 80
Manufacturer: Brazil chemical company
EVA (ethylene vinyl acetate copolymer #) /3169Z/ DuPont dow
Purpose: thin film
Note: the characteristics of slip agent, agent, heat stabilizer, antioxidant BHT
Important beters: melt flow rate: 1.5 g/10min density: VEKA g/cm3 softening point: 68 filler content: 18%
Manufacturer: Dow DuPont Co
EVA (ethylene vinyl acetate copolymer #) /ER200V-3/ Japan Sea
Usage: other
Important beters: melt flow rate: 2.8 g/10min density: tensile strength of 0.94 g/cm3: elongation at break of 15 MPa: bending modulus: 59 MPa hardness: 37
Manufacturer: Japan Offshore Oil Resources Development Corporation
EVA (ethylene vinyl acetate copolymer #) /LV372/ Japan JPC
Usage: other
Features: gloss, high workability, good clarity, high, general purpose
Important beters: melt flow rate: 12 g/10min bending modulus: hardness of 50 MPa: VEKA softening point: 58 degrees of brittleness temperature: -70
Manufacturer: Japan JPC company
EVA (ethylene vinyl acetate copolymer #) /AZ FC 200/ API in Italy
Usage: other
Remark: cross bable
Important beters: density: 0.21 g/cm3 tensile strength: 2 MPa elongation: 230% hardness: 45
Manufacturer: Italy API company
EVA (ethylene vinyl acetate copolymer #) Exxon chemical /UL728CC3/
Purpose: thin film
Remark: VAC content 28%
Important beters: melt flow rate: 7 g/10min density: 0.955 g/cm3
Manufacturer: Exxon Chemicai Company
EVA (ethylene vinyl acetate copolymer #) Exxon chemical /UL00730CC3/
Purpose: thin film
Remark: VAC content 30%
Important beters: melt flow rate: 7 g/10min density: 0.953 g/cm3
Manufacturer: Exxon Chemicai Company
EVA (ethylene vinyl acetate copolymer #) Exxon chemical /UL00909CC1/
Usage: other
Remark: VAC content 9%
Important beters: melt flow rate: 9 g/10min density: 0.926 g/cm3
Manufacturer: Exxon Chemicai Company
EVA (ethylene vinyl acetate copolymer #) /E060A/ Han Hua Total
Purpose: thin film
Features: features: transparency, good processing
Important beters: melt flow rate: 0.8 g/10min filler content: 6%
Manufacturer: Han Hua Total Ltd.
