产品详情
长期供应沙伯基础 PPO HFM4025价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
EVA (ethylene vinyl acetate copolymer #) /V3110F/ Yangzi BASF
Usage: other
Important beters: melt flow rate: 0.75 g/10min tensile strength: elongation at break of 30 MPa: VEKA softening point of: the content of filler at 88 DEG C
Manufacturer: Yangzi Petrochemical BASF Co., Ltd.
EVA (ethylene vinyl acetate copolymer #) /V5110F/ Yangzi BASF
Usage: other
Important beters: melt flow rate: 0.75 g/10min tensile strength: elongation at break of 10 MPa: VEKA softening point of: the content of filler at 66 DEG C
Manufacturer: Yangzi Petrochemical BASF Co., Ltd.
EVA (ethylene vinyl acetate copolymer #) /V4110F/ Yangzi BASF
Purpose: thin film
Important beters: melt flow rate: 0.75 g/10min tensile strength: elongation at break of 20 MPa: VEKA softening point of: the content of filler at 72 DEG C
Manufacturer: Yangzi Petrochemical BASF Co., Ltd.
EVA (ethylene vinyl acetate copolymer #) /V3610F/ Yangzi BASF
Usage: other
Important beters: melt flow rate: 0.75 g/10min tensile strength: elongation at break of 20 MPa: VEKA softening point of: the content of filler at 83 DEG C
Manufacturer: Yangzi Petrochemical BASF Co., Ltd.
EVA (ethylene vinyl acetate copolymer # Lotte chemical /VC590/)
Purpose: wire and cable material
Features: process, electrical characteristics
Important beters: melt flow rate: 4 g/10min density: tensile strength of 0.952 MPa: elongation at break of 19 g/cm3: hardness of 800%: VEKA softening point: 47
Manufacturer: South Korea Lotte Chemical Co Ltd
EVA (ethylene vinyl acetate copolymer # Lotte chemical /VC640/)
Purpose: wire and cable material
Features: process, electrical characteristics
Important beters: melt flow rate: 6 g/10min density: tensile strength of 0.935 MPa: elongation at break of 19 g/cm3: hardness of 800%: VEKA softening point: 61
Manufacturer: South Korea Lotte Chemical Co Ltd
EVA (ethylene vinyl acetate copolymer #) /1257/ America flintcomb ash
Usage: other
Features: excellent balance of optical properties and strength, good thermal stability
Important beters: melt flow rate: 2.5 g/10min density: tensile strength of 0.923 MPa: elongation at break of 12 g/cm3: hardness of 600%: VEKA softening point: 95
Manufacturer: American flint Hill resources
EVA (ethylene vinyl acetate copolymer #) /EB591/ West Lake
Usage: other
Features: good toughness and good heat sealing properties. Excellent low temperature brittleness
Important beters: melt flow rate: 2 g/10min density: 0.931 g/cm3 tensile strength: 23 MPa elongation: 950%
West Lake Chemical Co., Ltd.
EVA (ethylene vinyl acetate copolymer #) /FC45/ Italy
Purpose: thin film
Features: good optical properties, impact resistance, low creep
Important beters: melt flow rate: 0.3 g/10min tensile strength: 30 MPa elongation at break: 650% hardness: 40 VEKA softening point: 73 degrees of brittleness temperature
Manufacturer: Italy Eni
EVA (ethylene vinyl acetate copolymer #) /FF35/ Italy
Purpose: thin film
Features: good fracture mechanics, sealing perbance
Important beters: melt flow rate: 0.7 g/10min tensile strength: 28 MPa elongation at break: 650% hardness: 42 VEKA softening point: 75 degrees of brittleness temperature
Manufacturer: Italy Eni
