产品详情
长期供应沙伯基础 PPO PX0844价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
EVA (ethylene vinyl acetate copolymer #) /ML 30/ of Italy
Usage: other
Features: good chemical resistance and good elasticity
Important beters: melt flow rate: 2.5 g/10min tensile strength: 6.5 MPa bending modulus: 90 MPa hardness: VEKA softening point: 72 degrees of brittleness temperature: -80 C
Manufacturer: Italy Eni
EVA (ethylene vinyl acetate copolymer #) /ML 31/ of Italy
Usage: other
Features: good chemical resistance and good elasticity
Important beters: melt flow rate: 2.5 g/10min tensile strength: 6.5 MPa bending modulus: 90 MPa hardness: VEKA softening point: 72 degrees of brittleness temperature: -80 C
Manufacturer: Italy Eni
EVA (ethylene vinyl acetate copolymer #) /HM 2528/ Braskem in Brazil
Purpose: thin film
Features: good flexibility, good impact resistance, high ESCR, low molecular weight
Important beters: melt flow rate: 25 g/10min density: 0.95 g/cm3 hardness: 77
Manufacturer: Brazil chemical company
EVA (ethylene vinyl acetate copolymer # /H900W/ TOSOH)
Usage: other
Features: good viscosity, solubility, good weather resistance
Important beters: density: 1.1 g/cm3
Manufacturer: Dong Cao company
EVA (ethylene vinyl acetate copolymer #) /4310/ DuPont dow
Purpose: hot melt
Features note: 1 wt% methacrylic acid heat stabilizer: BHT antioxidant high grease and low viscosity
Important beters: melt flow rate: 500 g/10min density: 0.945 g/cm3 filler content: 25%
Manufacturer: Dow DuPont Co
EVA (ethylene vinyl acetate copolymer #) /7130F/ Taiwan chemical fiber
Purpose: thin film
Features: copolymer, processability, good, good toughness, general purpose
Important beters: melt flow rate: 0.9 g/10min density: elongation at break of g/cm3: 650% bending modulus: 24.5 MPa hardness: VEKA softening point: 80 degrees of brittleness temperature: -70
Manufacturer: Taiwan chemical fiber Limited by Share Ltd
EVA (ethylene vinyl acetate copolymer #) /PA-459/ Repsol of Spain
Usage: other
Features: oxidation resistance, compliance with food contact
Important beters: melt flow rate: 15 g/10min density: 0.956 g/cm3 hardness: 75
Manufacturer: YPF of Spain
EVA (ethylene vinyl acetate copolymer #) /EV305/ Taiwan poly
Usage: other
Features: excellent foaming processability, excellent physical properties
Important beters: melt flow rate: 3 g/10min density: tensile strength of 0.943 MPa: elongation at break of 19.6 g/cm3: hardness of 720%: VEKA softening point of 31: thermal debation temperature of 60 DEG C: temperature of 38 DEG C
Manufacturer: Asia polymerization Limited by Share Ltd
EVA (ethylene vinyl acetate copolymer # Lotte chemical /EV-500/)
Usage: other
Features: good processability and good adhesion
Important beters: melt flow rate: 2 g/10min density: 0.94 g/cm3 impact strength: 560 tensile strength: 9.41 MPa elongation: 500% bending strength: 10.3 MPa flexural modulus: 314 MPa hardness: 41 VEKA softening point of 75 DEG C:
Manufacturer: Korea Lotte Chemical Co., Ltd.
EVA (ethylene vinyl acetate copolymer #) Exxon chemical /UL00119CH7/
Usage: other
Note: the content of VAC 19% contains the characteristics of smoothing agent
Important beters: melt flow rate: 0.65 g/10min density: 0.941 g/cm3
Manufacturer: Exxon Chemicai Company
