产品详情
长期供应美国杜邦 PPA HTN54G35HSLR 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
EVA (ethylene vinyl acetate copolymer #) /PA-461/ Repsol of Spain
Purpose: hot melt
Remark: relatively low viscosity. High adhesion to more than 28%
Important beters: melt flow rate: 45 g/10min density: tensile strength of 0.956 g/cm3: elongation at break of 5 MPa: hardness: 73
Manufacturer: YPF of Spain
EVA (ethylene vinyl acetate copolymer # America Network and Diamond /NPP10-2528/)
Usage: other
Important beters: melt flow rate: 25 g/10min density: tensile strength of 0.951 g/cm3: 9.3 MPa elongation at break: 800% bending modulus: 10.3 MPa
Manufacturer: U.S. Network and Diamond Polymer Co
EVA (ethylene vinyl acetate copolymer #) /G MU76300/ Leander Basil
Usage: other
Important beters: melt flow rate: 10 g/10min density: tensile strength of 0.927 MPa: elongation at break of 11.7 g/cm3: bending modulus: 93.1 MPa hardness: VEKA softening point: 75 degrees of brittleness temperature: -76
Manufacturer: Basel industries, Inc.
EVA (ethylene vinyl acetate copolymer #) /4260/ DuPont dow
Purpose: hot melt
Features note: 1 wt% heat stabilizer for methacrylic acid: BHT antioxidant, superior thermal viscosity, grease resistance, optimum barrier properties
Important beters: melt flow rate: 6 g/10min density: 0.955 g/cm3 filler content: 28%
Manufacturer: Dow DuPont Co
EVA (ethylene vinyl acetate copolymer #) /DL19-8/ Ishida
Usage: other
Features: low shrinkage at low temperature, good tensile properties, hot air is very good
Important beters: melt flow rate: 0.5 g/10min density: tensile strength of 0.927 MPa: elongation at break of 23 g/cm3: hardness of 700%: VEKA softening point: 88 degrees of brittleness temperature: -70 DEG C filler content: 5%
Manufacturer: Showa Electric Corporation
EVA (ethylene vinyl acetate copolymer #) /33-45 PV/ France akema
Usage: other
Features: oxidation resistance, good stability, good flexibility, can be cross-bed
Important beters: melt flow rate: 38 g/10min density: tensile strength of 0.96 MPa: elongation at break of 9 g/cm3: hardness of 900%: VEKA softening point: 40
Manufacturer: Arkema
EVA (ethylene vinyl acetate copolymer #) /MV1030/ Thailand TPI
Usage: other
Features: high elasticity, low temperature, medium fluidity, no additives
Important beters: melt flow rate: 8 g/10min density: tensile strength of 0.928 MPa: elongation at break of 15 g/cm3: hardness of 730%: VEKA softening point: 73.6
Manufacturer: Thailand TPI Polene Co., Ltd.
EVA (ethylene vinyl acetate copolymer #) /7620M/ Taiwan chemical fiber
Usage: other
Features: copolymer, processability, good, crossbable, good thermal sealing property
Important beters: melt flow rate: 9 g/10min density: tensile strength of 0.93 MPa: elongation at break of 12.7 g/cm3: bending modulus: 23.5 MPa hardness: VEKA softening point: 73 degrees of brittleness temperature: -70
Manufacturer: Taiwan chemical fiber Limited by Share Ltd
EVA (ethylene vinyl acetate copolymer # America Network and Diamond /PELD00105-NAT/)
Usage: other
Important beters: melt flow rate: 1 g/10min density: elongation at break of 1.925 g/cm3: VEKA softening point: 88.9
Manufacturer: U.S. Network and Diamond Polymer Co
EVA (ethylene vinyl acetate copolymer #) /AZ HLC200/ API in Italy
Usage: other
Remark: gloss, good flexibility in cross-bing
Important beters: density: 0.21 g/cm3 tensile strength: 2.1 MPa elongation: 210% hardness: 45
Manufacturer: Italy API company
