产品详情
长期供应瑞士EMS PPA EBM 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
EVA (ethylene vinyl acetate copolymer #) /YV 1055/ TPI in Thailand
Purpose: hot melt
Features: high elasticity, good mechanical properties, thermal stability, low temperature resistance, no slip, no adhesion
Important beters: melt flow rate: 400 g/10min density: 0.95 g/cm3 elongation at break: 800% hardness: 15
Manufacturer: Thailand TPI Polene Co., Ltd.
EVA (ethylene vinyl acetate copolymer #) /PA-539/ Repsol of Spain
Purpose: thin film
Features: excellent mechanical and optical properties. Antioxidant additive
Important beters: melt flow rate: 2 g/10min density: tensile strength of 0.937 g/cm3: elongation at break of 22 MPa: VEKA softening point: 64
Manufacturer: YPF of Spain
EVA (ethylene vinyl acetate copolymer #) /PA-444/ Repsol of Spain
Purpose: hot melt
Low melt viscosity. Good compatibility with adhesive resin and wax
Important beters: melt flow rate: 50 g/10min density: tensile strength of 0.95 g/cm3: elongation at break of 8 MPa: hardness: 76
Manufacturer: YPF of Spain
EVA (ethylene vinyl acetate copolymer #) /UE-1220/31F/ Brazil Quattor
Purpose: thin film
Features: appropriate strain capacity, good compatibility and high mechanical strength
Important beters: melt flow rate: 2 g/10min density: tensile strength of 0.932 MPa: elongation at break of 13 g/cm3: hardness of 885%: VEKA softening point: 69
Manufacturer: Brazil Quattor Petrochemical Industries Co
EVA (ethylene vinyl acetate copolymer # /UE662157/ Leander Basil)
Usage: other
Features: good adhesion, good processing perbance, high opening, high sliding
Important beters: melt flow rate: 32 g/10min tensile strength: 8.96 MPa elongation at break: 700% hardness: 30 VEKA softening point: 54 degrees of brittleness temperature
Manufacturer: Basel industries, Inc.
EVA (ethylene vinyl acetate copolymer # /HMP-366/ Milstein)
Usage: other
Features: good flexibility, good bability, good weather resistance, low temperature impact resistance
Important beters: melt flow rate: 9 g/10min density: tensile strength of 0.93 g/cm3: 11.7 MPa elongation at break: 95.1% hot debation temperature: C
Manufacturer: Milstein (Muehlstein)
EVA (ethylene vinyl acetate copolymer #) /PA-461-S/ Repsol of Spain
Usage: other
Low temperature freezing point, oxidation resistance, compliance with food contact
Important beters: melt flow rate: 45 g/10min density: 0.956 g/cm3 hardness: 73
Manufacturer: YPF of Spain
EVA (ethylene vinyl acetate copolymer #) /TN2006/ Brazil Braskem
Usage: other
Features: * ultra high toughness * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Important beters: melt flow rate: 0.7 g/10min density: tensile strength of 0.94 MPa: elongation at break of 33 g/cm3: hardness of 680%: VEKA softening point: 70
Manufacturer: Brazil chemical company
EVA (ethylene vinyl acetate copolymer #) /PA-502/ Repsol of Spain
Purpose: thin film
Features: excellent mechanical and optical properties. Antioxidant additive
Important beters: melt flow rate: 2 g/10min density: tensile strength of 0.926 MPa: elongation at break of 19 g/cm3: hardness of 750%: VEKA softening point: 83
Manufacturer: YPF of Spain
EVA (ethylene vinyl acetate copolymer #) /PA-570/ Repsol of Spain
Purpose: thin film
Features: easy machining, excellent mechanical and optical properties. Antioxidant additive.
Important beters: melt flow rate: 0.3 g/10min density: tensile strength of 0.932 g/cm3: elongation at break of 29 MPa: VEKA softening point: 76
Manufacturer: YPF of Spain
