产品详情
长期供应美国苏威 PPA HFFR 4133NT价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
HDPE (high density polyethylene # pressure) /4060T/ Mitsui Chemicals
Purpose: thin film
Important beters: melt flow rate: 7 g/10min density: 0.961 g/cm3
Manufacturer: Mitsui Chemicals
HDPE (high density polyethylene # pressure) /6000C/ Ishida
Usage: other
Important beters: melt flow rate: 3 g/10min density: 0.96 g/cm3
Manufacturer: Showa Electric Corporation
HDPE (high density polyethylene # pressure) /6000F/ Ishida
Usage: other
Important beters: melt flow rate: 3 g/10min density: 0.96 g/cm3
Manufacturer: Showa Electric Corporation
HDPE (high density polyethylene # pressure) /5008/ Ishida
Purpose: thin film
Important beters: melt flow rate: 0.65 g/10min density: 0.95 g/cm3
Manufacturer: Showa Electric Corporation
HDPE (high density polyethylene # pressure) /HD5211UA/ Iran petrochemical
Usage: other
Important beters:
Manufacturer: Iran national Petrochemical Industries Co
HDPE (high density polyethylene # pressure) /5000S/ Daqing Petrochemical / oil Southern China
Usage: other
Important beters:
Manufacturer: PetroChina Southern China
HDPE (high density polyethylene # pressure) /5000S/ Daqing Petrochemical / oil in North China
Usage: other
Important beters:
Manufacturer: PetroChina North China
HDPE (high density polyethylene # pressure) /50045E/ dow
Usage: other
Important beters: melt flow rate: 0.12 g/10min density: 0.945 g/cm3
Manufacturer: Dow Chemical Corporation
HDPE (high density polyethylene # pressure) /59900.86/ dow
Usage: other
Important beters: melt flow rate: 12 g/10min density: 0.955 g/cm3
Manufacturer: Dow Chemical Corporation
HDPE (high density polyethylene # pressure) /80255E/ dow
Usage: other
Important beters: melt flow rate: 2 g/10min density: 0.956 g/cm3 bending modulus: 1070 MPa hardness: 64
Manufacturer: Dow Chemical Corporation
