产品详情
长期供应美国杜邦POM 911P Delrin价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
LLDPE (linear low density polyethylene # type high pressure polyethylene) /801-SB/ MPI
Purpose: thin film
Features: smooth, anti caking, comonomer, comonomer
Important beters: melt flow rate: 1 g/10min density: 0.919 g/cm3
Manufacturer: American MPI company
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBN7541/ Singapore)
Usage: other
Important beters: melt flow rate: 3 g/10min
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBW009/ Singapore)
Usage: other
Important beters: melt flow rate: 20 g/10min
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene) /HS-7098C NT 7/ dow
Usage: other
Important beters: melt flow rate: 1 g/10min density: 0.923 g/cm3
Manufacturer: Dow Chemical Corporation
LLDPE (linear low density polyethylene # linear polyethylene) /HS-7028/ Fushun petrochemical
Usage: other
Important beters: melt flow rate: 28 g/10min density: tensile strength of 0.918 g/cm3: 27 MPa
Manufacturer: PetroChina Co Ltd Fushun Petrochemical Branch
LLDPE (linear low density polyethylene # type high-pressure polyethylene) /5120N/ NKNKh of Russia
Purpose: thin film
Important beters: melt flow rate: 0.7 g/10min density: notched impact strength of 0.918 g/cm3: tensile strength: 50 MPa elongation: 700%
Manufacturer: Russian Nizhnekamskneftekhim company
LLDPE (linear low density polyethylene # type high-pressure polyethylene) /5120P/ NKNKh of Russia
Purpose: thin film
Important beters: melt flow rate: 1.4 g/10min density: notched impact strength of 0.918 g/cm3: tensile strength: 50 MPa elongation: 550%
Manufacturer: Russian Nizhnekamskneftekhim company
LLDPE (linear low density polyethylene # type high-pressure polyethylene) /5120Q/ NKNKh of Russia
Purpose: thin film
Important beters: melt flow rate: 2.5 g/10min density: notched impact strength of 0.918 g/cm3: tensile strength: 53 MPa elongation: 500%
Manufacturer: Russian Nizhnekamskneftekhim company
LLDPE (linear low density polyethylene # type high-pressure polyethylene) /5122N/ NKNKh of Russia
Purpose: thin film
Important beters: melt flow rate: 0.7 g/10min density: notched impact strength of 0.92 g/cm3: tensile strength: 50 MPa elongation: 700%
Manufacturer: Russian Nizhnekamskneftekhim company
