产品详情
长期供应德国拜耳 PC 2605 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
LLDPE (linear low density polyethylene # type high pressure polyethylene) /L3106/ America flintcomb ash
Purpose: thin film
Features: good sealing and optical properties.
Important beters: melt flow rate: 6.6 g/10min density: 0.919 g/cm3 tensile strength: 30 MPa elongation: 730%
Manufacturer: American flint Hill resources
LLDPE (linear low density polyethylene # linear polyethylene) /CB9270/ Borealis
Usage: other
Remark: barrier resin, good heat resistance, good processing, advanced cracking (stress cracking resistance)
Important beters: melt flow rate: 12 g/10min
Manufacturer: Nordic Chemical Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene) /FM5270/ Borealis
Usage: other
Features: antioxidants, good stiffness, low density
Important beters: melt flow rate: 1.3 g/10min density: 0.927 g/cm3 tensile strength: 51 MPa elongation: 650%
Manufacturer: Nordic Chemical Co., Ltd.
LLDPE (linear low density polyethylene # type high pressure polyethylene) /FJ-31/ Brazil Braskem
Usage: other
Features: copolymer, good processing
Important beters: melt flow rate: 2.7 g/10min density: tensile strength of 0.917 g/cm3: elongation at break of 21 MPa: VEKA softening point: 102 degrees of brittleness temperature: -68
Manufacturer: Brazil chemical company
LLDPE (linear low density polyethylene # type high pressure polyethylene) /PLURIS 9300/ Braskem in Brazil
Usage: other
Features: good toughness, high stiffness, low gel
Important beters: melt flow rate: 0.55 g/10min density: 0.92 g/cm3 tensile strength: 14 MPa elongation: 890%
Manufacturer: Brazil chemical company
LLDPE (linear low density polyethylene # linear polyethylene) /LL0207MA/ Malaysia daito
Usage: other
Features: high strength
Important beters: melt flow rate: 0.7 g/10min tensile strength: elongation at break of 42 MPa: VEKA softening point: 100
Manufacturer: Malaysia daito company
LLDPE (linear low density polyethylene # linear polyethylene) /LL0220SA/ Malaysia daito
Usage: other
Features: low gel, slip
Important beters: melt flow rate: 2 g/10min tensile strength: elongation at break of 33 MPa: VEKA softening point: 100
Manufacturer: Malaysia daito company
LLDPE (linear low density polyethylene # linear polyethylene) /NG 2045.11B/ dow
Usage: other
Important beters: melt flow rate: 1 g/10min density: 0.921 g/cm3 tensile strength: 9.99 MPa elongation: 730%
Manufacturer: Dow Chemical Corporation
LLDPE (linear low density polyethylene # type high pressure polyethylene) /LL0220AA/ Sidpec in Egypt
Purpose: thin film
Important beters: melt flow rate: 2 g/10min density: tensile strength of 0.92 g/cm3: elongation at break of 34 MPa: VEKA softening point: 93
Manufacturer: Egypt Sidi Krier Petrochemical Industries Co
LLDPE (linear low density polyethylene # type high pressure polyethylene) /LL0220KJ/ Sidpec in Egypt
Purpose: thin film
Important beters: melt flow rate: 2 g/10min density: tensile strength of 0.92 g/cm3: elongation at break of 25 MPa: VEKA softening point: 93
Manufacturer: Egypt Sidi Krier Petrochemical Industries Co
