产品详情
长期供应德国拜耳 PC 1248 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in3 | ISO 1183 |
| Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.60 % | 0.60 % | ISO 62 |
| Linear Mold Shrinkage, Flow |
0.0040 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0040 - 0.0060 in/in @Thickness 0.126 in |
SABIC Method |
| Melt Index of Compound |
23 g/10 min @Load 2.16 kg, Temperature 260 °C |
23 g/10 min @Load 4.76 lb, Temperature 500 °F |
MVR [cm^3/10 min]; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 46.0 MPa | 6670 psi | 50 mm/min; ISO 527 |
| 47.0 MPa | 6820 psi | Type I, 50 mm/min; ASTM D638 | |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 |
| 63.0 MPa | 9140 psi | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ISO 527 |
| 65 % | 65 % | Type I, 50 mm/min; ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 4.1 % | 4.1 % | Type I, 50 mm/min; ASTM D638 | |
其他型号参数与生产商——————————
LLDPE (linear low density polyethylene # type high pressure polyethylene) /LL8F 801/ MPI
Usage: other
Characteristic: the copolymerization of monomer
Important beters: melt flow rate: 1 g/10min density: 0.919 g/cm3
Manufacturer: American MPI company
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBB0091/ Singapore)
Usage: other
Important beters: melt flow rate: 20 g/10min density: 1.36 g/cm3
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBB2401/ Singapore)
Purpose: thin film
Important beters: melt flow rate: 30 g/10min density: 1.16 g/cm3
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBW0551/ Singapore)
Purpose: thin film
Important beters: melt flow rate: 25 g/10min density: 2.09 g/cm3
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBW1281/ Singapore)
Purpose: thin film
Important beters: melt flow rate: 30 g/10min density: 1.73 g/cm3
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBW1391/ Singapore)
Purpose: thin film
Important beters: melt flow rate: 30 g/10min density: 1.73 g/cm3
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene polymer /MBW1791/ Singapore)
Purpose: thin film
Important beters: melt flow rate: 5 g/10min density: 2 g/cm3
Manufacturer: Singapore polymer Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene) /118WJ/ SABIC of Saudi Arabia
Usage: other
Features: high tensile strength, good toughness and good general purpose
Important beters: melt flow rate: 1 g/10min density: tensile strength of 0.918 g/cm3: 30 MPa elongation at break: 800% hot debation temperature: C
Manufacturer: Saudi Basic Industries
LLDPE (linear low density polyethylene # linear polyethylene) /U8835/ Lotte chemical
Usage: other
Features note: through ROHS certification, antioxidants, good sealing perbance
Important beters: melt flow rate: 14 g/10min density: VEKA g/cm3 softening point: 94
Manufacturer: Korea Lotte Chemical Co., Ltd.
LLDPE (linear low density polyethylene # linear polyethylene) /UF917/ Lotte chemical
Purpose: thin film
Features: sliding, good processability, antioxidant
Important beters: melt flow rate: 1.1 g/10min density: notched impact strength of 0.92 g/cm3: tensile strength: 38.2 MPa elongation: 700%
Manufacturer: Korea Lotte Chemical Co., Ltd.
