产品详情
长期供应科思创(原:拜耳) TPU 786 E价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.20 g/cc
0.0434 lb/in3
ISO 1183
Mechanical Properties
Metric
English
Comments
Hardness, Shore A
85
85
ISO 868
Hardness, Shore D
33
33
ISO 868
Tensile Strength
2.00 MPa
@Strain 10.0 %
290 psi
@Strain 10.0 %
200 mm/min; DIN 53504
4.70 MPa
@Strain 50.0 %
682 psi
@Strain 50.0 %
200 mm/min; DIN 53504
5.80 MPa
@Strain 100 %
841 psi
@Strain 100 %
200 mm/min; DIN 53504
16.6 MPa
@Strain 300 %
2410 psi
@Strain 300 %
200 mm/min; DIN 53504
Tensile Strength, Ultimate
52.0 MPa
7540 psi
200 mm/min; DIN 53504
Elongation at Break
531 %
531 %
200 mm/min; DIN 53504
Tensile Modulus
0.0210 GPa
@Temperature 60.0 °C
3.05 ksi
@Temperature 140 °F
storage; ISO 6721-1,-4
其他型号参数与生产商——————————
PC/ABS (PC & ABS) /TF15/ us Infinity
Usage: other
Features note: perbance characteristics: by lubrication.
Important beters: density: 1.2 g/cm3 molding shrinkage rate: notched Izod impact strength: 190 tensile strength: 46.2 MPa bending modulus: 2280 MPa hot debation temperature: 132 C
Manufacturer: Infinity Polymer Co
PC/ABS (PC and ABS alloy) /AC3250/ Taiwan chemical fiber
Usage: other
Important beters: melt flow rate: 18 g/10min density: 1.31 g/cm3 molding shrinkage rate: 0.3% notched impact strength: 59 tensile strength: 62.8 MPa flexural strength: 111 MPa flexural modulus: 4020 MPa hardness: 117 thermal debation temperature: 92 degrees
Manufacturer: Taiwan chemical fiber Limited by Share Ltd
PC/ABS (PC and ABS alloy) /H6016/ Beijing Lun Lun
Usage: other
Important beters: melt flow rate: 20 g/10min density: 1.14 g/cm3 impact strength: 700 tensile strength: 54 MPa elongation: 126% bending strength: 85 MPa flexural modulus: 2220 MPa hardness: 116 thermal debation temperature: 125 degrees
Manufacturer: Beijing Han Lun Da Technology & Trade Co., Ltd.
PC/ABS (PC and ABS alloy) /C1100/ Elizabeth Foundation (GE)
Usage: other
Important beters: melt flow rate: 8 g/10min density: notched Izod impact strength: g/cm3 tensile strength: 55 MPa elongation at break: 30% bending strength: 65 MPa bending modulus: 2300 MPa thermal debation temperature: 100
Manufacturer: SABIC innovative plastics (GE)
PC/ABS (PC and ABS alloy) /C2100/ Elizabeth Foundation (GE)
Usage: other
Important beters: melt flow rate: 16 g/10min density: notched impact strength of g/cm3: 46 elongation at break: 60% bending strength: 85 MPa bending modulus: 2500 MPa hardness: 123 VEKA softening point: 136
Manufacturer: SABIC innovative plastics (GE)
ABS/PC (ABS and PC alloy #) /001SC/ Nanjing Dellon
Usage: other
Important beters: density: 1.15 g/cm3 molding shrinkage rate: 0.6% notched impact strength: tensile strength: 50 MPa elongation at break: 20% bending strength: 75 MPa bending modulus: 2000 MPa hardness: 116 hot debation temperature: 110 C
Manufacturer: Nanjing Dellon Plastic Alloy Co. Ltd.
PC/ABS (PC /DN-1530B/ and ABS alloy) Japan Teijin
Usage: other
Important beters: density: 1.4 g/cm3 molding shrinkage rate: 0.2% notched impact strength: 4 elongation at break: bending strength: 110 MPa bending modulus: 8000 MPa VEKA softening point: thermal debation temperature: 108 C
Manufacturer: Japan Teijin chemical company
PC/ABS (PC and ABS alloy) /E100/ Shanghai ran
Usage: other
Features: Plating type I
Important beters: density: 1.16 g/cm3 water absorption: notched impact strength: 600 tensile strength: 50 MPa elongation at break: 120% bending strength: 90 MPa bending modulus: 2400 MPa thermal debation temperature: 90 C
Shanghai Engineering Plastics Co., Ltd.
PC/ABS (PC and ABS alloy) /E150/ Shanghai ran
Usage: other
Features: Plating type II
Important beters: density: 1.16 g/cm3 water absorption: notched impact strength: 600 tensile strength: 55 MPa elongation at break: 108% bending strength: 95 MPa bending modulus: 2250 MPa thermal debation temperature: 90 C
Shanghai Engineering Plastics Co., Ltd.
ABS/PC (ABS and PC alloy #) /HAC-8240/ Korea Kumho
Usage: other
Important beters: melt flow rate: 80 g/10min density: 1.12 g/cm3 molding shrinkage rate: 0.5% tensile strength: 54.5 MPa flexural strength: 71.9 MPa flexural modulus: 2070 MPa hardness: 115 VEKA softening point of 115 DEG C heat debation temperature: 100 degrees
Manufacturer: Kumho Korea Petroleum Chemical Corporation
