产品详情
长期供应科思创(原:拜耳) PC 1795 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.20 g/cc
0.0434 lb/in3
ISO 1183
Mechanical Properties
Metric
English
Comments
Hardness, Shore A
85
85
ISO 868
Hardness, Shore D
33
33
ISO 868
Tensile Strength
2.00 MPa
@Strain 10.0 %
290 psi
@Strain 10.0 %
200 mm/min; DIN 53504
4.70 MPa
@Strain 50.0 %
682 psi
@Strain 50.0 %
200 mm/min; DIN 53504
5.80 MPa
@Strain 100 %
841 psi
@Strain 100 %
200 mm/min; DIN 53504
16.6 MPa
@Strain 300 %
2410 psi
@Strain 300 %
200 mm/min; DIN 53504
Tensile Strength, Ultimate
52.0 MPa
7540 psi
200 mm/min; DIN 53504
Elongation at Break
531 %
531 %
200 mm/min; DIN 53504
Tensile Modulus
0.0210 GPa
@Temperature 60.0 °C
3.05 ksi
@Temperature 140 °F
storage; ISO 6721-1,-4
其他型号参数与生产商——————————
ABS/PC (ABS PC /SE-22 FR/ alloy and #) in India
Usage: other
Features: granular material
Important beters: melt flow rate: 26 g/10min density: 1.2 g/cm3 molding shrinkage rate: 0.4% notched impact strength: 226 tensile strength: 37.3 MPa flexural strength: 57.9 MPa flexural modulus: 2160 MPa hardness: 106 VEKA softening point of 95 DEG C heat debation temperature: 82 degrees
Manufacturer: India Bhansali engineering polymer Co., Ltd.
ABS/PC (ABS PC /SC1A7-1015/ Spartech alloy #)
Usage: other
Features: good machinability, high heat resistance, good toughness, medium viscosity
Important beters: melt flow rate: 4 g/10min notched impact strength: 641
Manufacturer: American Spartech company
ABS/PC (ABS PC /MUH MPC4601/ KANEKA alloy #) Japan
Usage: other
Features: good impact resistance, good molding perbance, high heat resistance
Important beters: density: 1.12 g/cm3 notched impact strength: tensile strength: 57 MPa elongation at break: 100% bending strength: 87 MPa bending modulus: 2500 MPa thermal debation temperature: 112 C
Manufacturer: Japan KANEKA company
ABS/PC (ABS PC and /GN5008HF/LG chemical # alloy)
Usage: other
Remark: no halogen high impact resistance
Important beters: melt flow rate: 18 g/10min density: 1.18 g/cm3 molding shrinkage rate: 0.4% notched impact strength: 343 tensile strength: 58.8 MPa elongation: 50% bending strength: 84.3 MPa flexural modulus: 2450 MPa hardness: 113 thermal debation temperature: 88 degrees
Manufacturer: Korea LG chemical company
ABS/PC (ABS PC and /HP5004/LG chemical # alloy)
Usage: other
Features: medium temperature resistant low temperature impact
Important beters: melt flow rate: 5 g/10min density: 1.14 g/cm3 molding shrinkage rate: 0.4% notched impact strength: 588 tensile strength: 54.9 MPa elongation: 100% bending strength: 88.3 MPa flexural modulus: 2260 MPa hardness: 111 thermal debation temperature: 112 degrees
Manufacturer: Korea LG chemical company
ABS/PC (ABS PC and /NS5000C/LG chemical # alloy)
Usage: other
Features note: good impact resistance medium heat resistance
Important beters: melt flow rate: 4.8 g/10min density: 1.14 g/cm3 molding shrinkage rate: 0.5% notched impact strength: 70 tensile strength: 53 MPa flexural strength: 85.3 MPa flexural modulus: 2160 MPa hardness: 114 thermal debation temperature: 114 degrees
Manufacturer: Korea LG chemical company
ABS/PC (ABS PC /G/ VAMP TECH alloy #) Italy
Usage: other
Features: good surface finish
Important beters: density: 1.12 g/cm3 molding shrinkage: 0.4% notched impact strength: tensile strength: 55 MPa elongation at break: 50% bending strength: 85 MPa bending modulus: 2300 MPa VEKA softening point: 118
Manufacturer: Italy VAMP TECH company
PC/ABS (PC and ABS alloy) /1173/ Ningbo land
Usage: other
Features: plating grade, good toughness, excellent high and low temperature resistance, high surface finish, easy flow.
Important beters: density: 1.13 g/cm3 tensile strength: 48 MPa elongation at break: 50% bending strength: MPa bending modulus: 2200 MPa hardness: 110 hot debation temperature: 109 C
Ningbo Jin Industry & Trade Co., Ltd.
ABS/PC (ABS PC /055/80-GF20/ Almaak alloy #) Germany
Usage: other
Features: glass fiber reinforced materials, 20% filler by weight
Important beters: density: 1.25 g/cm3 water absorption: 0.2% molding shrinkage rate: 0.3% notched impact strength: tensile strength: 110 MPa elongation at break: 2.5% VEKA softening point: 137 degrees C hot debation temperature: 124 C
Manufacturer: Almaak, Germany
ABS/PC (ABS PC /R050/65S Black/ Almaak alloy #) Germany
Usage: other
Remark: good liquidity
Important beters: density: 1.13 g/cm3 water absorption: 0.2% molding shrinkage rate: 0.5% notched impact strength: tensile strength: 55 MPa elongation at break: 5% VEKA softening point: 123 degrees C hot debation temperature: 105 C
Manufacturer: German Almaak company
