产品详情
长期供应荷兰DSM Stanyl PA46 TE250F3 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.41 g/cc
0.0509 lb/in3
ISO 1183
Moisture Absorption
2.60 %
2.60 %
Humidity; Sim. ISO 62
Linear Mold Shrinkage, Flow
0.0050 cm/cm
0.0050 in/in
ISO 294-4
Linear Mold Shrinkage, Transverse
0.013 cm/cm
0.013 in/in
ISO 294-4
Mechanical Properties
Metric
English
Comments
Tensile Strength at Break
210 MPa
30500 psi
ISO 527-1/-2
90.0 MPa
@Temperature 200 °C
13100 psi
@Temperature 392 °F
ISO 527-1/-2
95.0 MPa
@Temperature 180 °C
13800 psi
@Temperature 356 °F
ISO 527-1/-2
110 MPa
@Temperature 160 °C
16000 psi
@Temperature 320 °F
ISO 527-1/-2
125 MPa
@Temperature 120 °C
18100 psi
@Temperature 248 °F
ISO 527-1/-2
Elongation at Break
3.0 %
3.0 %
ISO 527-1/-2
5.5 %
@Temperature 120 °C
5.5 %
@Temperature 248 °F
ISO 527-1/-2
5.5 %
@Temperature 160 °C
5.5 %
@Temperature 320 °F
ISO 527-1/-2
其他型号参数与生产商——————————
TPE (thermoplastic elastomer) /S3130A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 2 g/10min density: tensile strength of 0.958 g/cm3: elongation at break of 3.25 MPa: 730% hardness: 29 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3155A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 8 g/10min density: tensile strength of 0.988 g/cm3: elongation at break of 5.76 MPa: 760% hardness: 53 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3165A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 8 g/10min density: tensile strength of 0.988 g/cm3: elongation at break of 6.45 MPa: 760% hardness: 63 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3170AE/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good melt strength, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant perbance
Important beters: melt flow rate: 1.3 g/10min density: tensile strength of 0.978 g/cm3: elongation at break of 11 MPa: 690% hardness: 69 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3175A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 5 g/10min density: tensile strength of 0.988 g/cm3: elongation at break of 7.27 MPa: 750% hardness: 73 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3340A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 12 g/10min density: tensile strength of 1.12 g/cm3: elongation at break of 3.62 MPa: 760% hardness: 37 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3350A/ Belgium RAVAGO
Usage: other
Note: anti solubility characteristics of anti ultraviolet properties of high elastic material Recyclable good processability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol resistance, high acid resistant and oil resistant properties of soft detergent
Important beters: melt flow rate: 8 g/10min density: tensile strength of 1.15 g/cm3: elongation at break of 4.48 MPa: 750% hardness: 48 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S4025A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 8 g/10min density: tensile strength of 0.888 g/cm3: elongation at break of 3.62 MPa: 750% hardness: 23 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S4035A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 1.5 g/10min density: tensile strength of 0.888 g/cm3: elongation at break of 5.45 MPa: 730% hardness: 33 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /Y14056/ Ningbo three Bo
Usage: other
Features: surface vision: fog surface molding beters: injection temperature 160-230 DEG C, extrusion temperature 170-200 DEG C; injection molding medium pressure, the use of high back pressure extrusion; rapid injection molding. Oil resistance: at room temperature can reach a certain limit of non fuel oil. Safety and hygiene: allow direct contact with skin and non fat foods.
Important beters: melt flow rate: 39 g/10min density: 1.08 g/cm3 molding shrinkage: tensile strength: 6.7 MPa elongation at break: 540% hardness: 55
Manufacturer: three Bo polymer alloy (Ningbo) Co., Ltd.
