产品详情
长期供应荷兰DSM Stanyl PA46 TE250F9 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.41 g/cc
0.0509 lb/in3
ISO 1183
Moisture Absorption
2.60 %
2.60 %
Humidity; Sim. ISO 62
Linear Mold Shrinkage, Flow
0.0050 cm/cm
0.0050 in/in
ISO 294-4
Linear Mold Shrinkage, Transverse
0.013 cm/cm
0.013 in/in
ISO 294-4
Mechanical Properties
Metric
English
Comments
Tensile Strength at Break
210 MPa
30500 psi
ISO 527-1/-2
90.0 MPa
@Temperature 200 °C
13100 psi
@Temperature 392 °F
ISO 527-1/-2
95.0 MPa
@Temperature 180 °C
13800 psi
@Temperature 356 °F
ISO 527-1/-2
110 MPa
@Temperature 160 °C
16000 psi
@Temperature 320 °F
ISO 527-1/-2
125 MPa
@Temperature 120 °C
18100 psi
@Temperature 248 °F
ISO 527-1/-2
Elongation at Break
3.0 %
3.0 %
ISO 527-1/-2
5.5 %
@Temperature 120 °C
5.5 %
@Temperature 248 °F
ISO 527-1/-2
5.5 %
@Temperature 160 °C
5.5 %
@Temperature 320 °F
ISO 527-1/-2
其他型号参数与生产商——————————
TPE (thermoplastic elastomer) /Y14076/ Ningbo three Bo
Usage: other
Features: surface vision: fog surface molding beters: injection temperature 160-230 DEG C, extrusion temperature 170-200 DEG C; injection molding medium pressure, the use of high back pressure extrusion; rapid injection molding. Oil resistance: at room temperature can reach a certain limit of non fuel oil. Safety and hygiene: allow direct contact with skin and non fat foods.
Important beters: melt flow rate: 32 g/10min density: 1.08 g/cm3 molding shrinkage: tensile strength: 10.5 MPa elongation at break: 515% hardness: 77
Manufacturer: three Bo polymer alloy (Ningbo) Co., Ltd.
TPE (thermoplastic elastomer) /Y14008/ Ningbo three Bo
Usage: other
Features: surface vision: fog surface molding beters: injection temperature 160-230 DEG C, extrusion temperature 170-200 DEG C; injection molding medium pressure, the use of high back pressure extrusion; rapid injection molding. Oil resistance: at room temperature can reach a certain limit of non fuel oil. Safety and hygiene: allow direct contact with skin and non fat foods.
Important beters: melt flow rate: 115 g/10min density: 1.04 g/cm3 molding shrinkage: tensile strength: 1.4 MPa elongation at break: 835% hardness: 8
Manufacturer: three Bo polymer alloy (Ningbo) Co., Ltd.
TPE (thermoplastic elastomer) /Y14036/ Ningbo three Bo
Usage: other
Features: surface vision: fog surface molding beters: injection temperature 160-230 DEG C, extrusion temperature 170-200 DEG C; injection molding medium pressure, the use of high back pressure extrusion; rapid injection molding. Oil resistance: at room temperature can reach a certain limit of non fuel oil. Safety and hygiene: allow direct contact with skin and non fat foods
Important beters: melt flow rate: 43 g/10min density: 1.08 g/cm3 molding shrinkage: tensile strength: 4.3 MPa elongation at break: 720% hardness: 36
Manufacturer: three Bo polymer alloy (Ningbo) Co., Ltd.
TPE (thermoplastic elastomer) /Y14052/ Ningbo three Bo
Usage: other
Features: surface vision: fog surface molding beters: injection temperature 160-230 DEG C, extrusion temperature 170-200 DEG C; injection molding medium pressure, the use of high back pressure extrusion; rapid injection molding. Oil resistance: at room temperature can reach a certain limit of non fuel oil. Safety and hygiene: allow direct contact with skin and non fat foods.
Important beters: melt flow rate: 38 g/10min density: 0.95 g/cm3 molding shrinkage: tensile strength: 6.3 MPa elongation at break: 730% hardness: 52
Manufacturer: three Bo polymer alloy (Ningbo) Co., Ltd.
TPE (thermoplastic elastomer) /EA5790A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate of the anti ultraviolet perbance of high elasticity and high strength good dissolution Recyclable material machinability, good flexibility and good adhesion had good resistance to ozone resistance and alcohol resistance, high detergent resistance oil resistance of soft and elastic
Important beters: melt flow rate: 2.5 g/10min density: elongation at break of 1.17 g/cm3: bending modulus: 11 MPa hardness: 90 brittle temperature: -34.4 C
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3145A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 1.2 g/10min density: tensile strength of 0.978 g/cm3: elongation at break of 4.31 MPa: 790% hardness: 41 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3170A HF/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 20 g/10min density: tensile strength of 0.988 g/cm3: elongation at break of 8.1 MPa: 730% hardness: 67 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S4045A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring and good ozone resistance, alkali resistance to alcohol resistance, high acid detergent resistance oil resistance and elastic
Important beters: melt flow rate: 2 g/10min density: tensile strength of 0.888 g/cm3: elongation at break of 4.65 MPa: 750% hardness: 42 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S4055A/ Belgium RAVAGO
Usage: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring and good ozone resistance, alkali resistance to alcohol resistance, high acid detergent resistance oil resistance and elastic
Important beters: melt flow rate: 5 g/10min density: tensile strength of 0.888 g/cm3: elongation at break of 8.41 MPa: 680% hardness: 55 brittle temperature
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S4065A/ Belgium RAVAGO
Usage: other
Features: low compression, high debation rate, high elasticity, good resistance to solubility, UV resistance, good processability, good color, and good recovery
