产品详情
长期供应荷兰DSM Stanyl PA46 46HF5041LW 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.41 g/cc
0.0509 lb/in3
ISO 1183
Moisture Absorption
2.60 %
2.60 %
Humidity; Sim. ISO 62
Linear Mold Shrinkage, Flow
0.0050 cm/cm
0.0050 in/in
ISO 294-4
Linear Mold Shrinkage, Transverse
0.013 cm/cm
0.013 in/in
ISO 294-4
Mechanical Properties
Metric
English
Comments
Tensile Strength at Break
210 MPa
30500 psi
ISO 527-1/-2
90.0 MPa
@Temperature 200 °C
13100 psi
@Temperature 392 °F
ISO 527-1/-2
95.0 MPa
@Temperature 180 °C
13800 psi
@Temperature 356 °F
ISO 527-1/-2
110 MPa
@Temperature 160 °C
16000 psi
@Temperature 320 °F
ISO 527-1/-2
125 MPa
@Temperature 120 °C
18100 psi
@Temperature 248 °F
ISO 527-1/-2
Elongation at Break
3.0 %
3.0 %
ISO 527-1/-2
5.5 %
@Temperature 120 °C
5.5 %
@Temperature 248 °F
ISO 527-1/-2
5.5 %
@Temperature 160 °C
5.5 %
@Temperature 320 °F
ISO 527-1/-2
其他型号参数与生产商——————————
TPE (thermoplastic elastomer) /S3050A/ Belgium RAVAGO
Uses: other
Note: the characteristics of high elasticity and high tensile strength anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol resistance, high acid detergent resistance oil resistance good toughness and soft
Important beters: melt flow rate: 8 g/10min density: 0.888 g/cm3 tensile strength: 4.85 MPa, elongation at break: 750% hardness: 49, embrittlement temperature: -60
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /S3185AE/ Belgium RAVAGO
Uses: other
Note: the characteristics of low friction coefficient and low compression rate and high elastic anti solubility good UV resistant Recyclable material machinability, good melt strength, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant perbance
Important beters: melt flow rate: 1.3 g/10min density: 0.988 g/cm3 tensile strength: 12.8 MPa, elongation at break: 700% hardness: 83, embrittlement temperature: -55
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer), /S4035A, CL, NAT/, Belgium, RAVAGO
Uses: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol acid detergent resistant oil resistant properties of soft
Important beters: melt flow rate: 8 g/10min density: 0.888 g/cm3 tensile strength: 5 MPa, elongation at break: 800% hardness: 33, embrittlement temperature: -65
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /Y14045/ Ningbo three Bo
Uses: other
Features: surface vision: fog bing beter: injection temperature 160-230 degrees, extrusion temperature 170-200 degrees; injection adopts medium pressure and extrusion use higher back pressure; use rapid injection molding. Oil resistance: at room temperature, contact the non - fuel oil to a certain extent. Safety and hygiene: allow direct contact with skin and non greasy foods.
Important beters: melt flow rate: 41 g/10min density: 1.08 g/cm3 molding shrinkage: 1.4% tensile strength: 5.7 MPa, elongation at break: 655%, hardness: 45
Three Bo polymer alloy (Ningbo) Co., Ltd.
TPE (thermoplastic elastomer) /WY0050/ Wang Yang polymer
Uses: other
Remark: thermoplastic elastomer WY0050 has excellent weather resistance, low temperature resistance and chemical resistance. It also meets the requirements of international heavy bl safety standards, and can meet the requirements of most applications. WY0050 thermoplastic elastomer can be recycled, and the runner, runner and abandoned injection molded parts can be reprocessed and utilized.
Important beter: density: 0.88 g/cm3, hardness: 5
Manufacturer: Wenzhou Wang Yang high polymer material factory
TPE (thermoplastic elastomer), /S4045A, CL, NAT/, Belgium, RAVAGO
Uses: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring and good ozone resistance, alkali resistance to alcohol resistance, high acid detergent resistance oil resistance and elastic
Important beters: melt flow rate: 12 g/10min density: 0.888 g/cm3 tensile strength: 5.3 MPa, elongation at break: 730% hardness: 43, embrittlement temperature: -65
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer), /S4065A, CL, NAT/, Belgium, RAVAGO
Uses: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring good ozone resistance and alkali - resistant alcohol acid detergent resistance oil resistance clarity, high elasticity
Important beters: melt flow rate: 25 g/10min density: 0.888 g/cm3 tensile strength: 9.1 MPa, elongation at break: 680% hardness: 62, embrittlement temperature: -65
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer), /S4055A, CL, NAT/, Belgium, RAVAGO
Uses: other
Note: the characteristics of low compression permanent debation rate high elastic anti solubility good UV resistant Recyclable material machinability, good coloring of good adhesion ozone resistance and alkali - resistant alcohol resistant perbance good thermal climate, high acid resistant oil resistant properties of soft detergent
Important beters: melt flow rate: 25 g/10min density: 0.888 g/cm3 tensile strength: 6.21 MPa, elongation at break: 1700% hardness: 54, embrittlement temperature: -65
Manufacturer: Belgium RAVAGO group
TPE (thermoplastic elastomer) /TP1060/ Ningbo constant development
Uses: other
Characteristic note: with excellent elasticity and high liquidity, can be directly followed by PP to enhance product quality and tactility. With excellent weather resistance, low temperature resistance, electrical insulation, chemical resistance, and in line with the international heavy bl safety standards, can meet the requirements of most applications. Can be recycled processing, scrap and waste injection molding parts can be re processing and utilization.
Important beters: melt flow rate: 40 g/10min density: 1 g/cm3 tensile strength: 11 MPa, elongation at break: 620% hardness: 60
Manufacturer: Ningbo constant polymer materials Co., Ltd.
TPE (thermoplastic elastomer) /WY7080SG1/ Wang Yang polymer
Uses: other
Characteristic note: plastic elastomer WY7080SG1 has excellent weather resistance, low temperature resistance, chemical resistance, and meets the international heavy bl safety standards, which can meet the requirements of most applications. WY7080SG1 thermoplastic elastomer can be recycled, and the runner, runner and abandoned injection molded parts can be reprocessed and utilized.
Important beter: density: 0.89 g/c
