产品详情
长期供应荷兰DSM Akulon PA6 K224-G6价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.13 g/cc
0.0408 lb/in3
ISO 1183
Water Absorption
9.5 %
9.5 %
Sim. to ISO 62
Moisture Absorption at Equilibrium
2.5 %
2.5 %
Humidity Absorption; Sim. to ISO 62
Viscosity Test
165 cm3/g
165 cm3/g
Viscosity Number
Thermal Properties
Metric
English
Comments
CTE, linear, Parallel to Flow
90.0 μm/m-°C
@Temperature 20.0 °C
50.0 μin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
CTE, linear, Transverse to Flow
100 μm/m-°C
@Temperature 20.0 °C
55.6 μin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
Melting Point
220 °C
428 °F
10°C/min; ISO 11357-1/-3
Debive Properties
Coating
Yes
Film Extrusion
Yes
Lubricants
Yes
RSV Formic Acid
2.6 g/100ml
ISO 307
Without Fillers
Yes
其他型号参数与生产商——————————
ABS/PC (ABS and PC alloy #) /050/85S-FR/ Germany
Usage: other
Remark: good fluidity and flame retardance
Important beters: density: 1.19 g/cm3 water absorption: 0.2% notched impact strength: tensile strength: 60 MPa elongation at break: VEKA softening point of 4%: thermal debation temperature: 90 C
Manufacturer: Almaak, Germany
ABS/PC (ABS PC /PCA-FR Eco-Friendly/ PTS alloy #)
Usage: other
Important beters: melt flow rate: 16 g/10min density: elongation at break of g/cm3: 40% bending strength: 96 MPa bending modulus: 2570 MPa thermal debation temperature: 88 C
Manufacturer: American PTS company
ABS/PC (ABS and PC alloy # dasailu) /S6500L/
Usage: other
Features: Perbance: halogen free flame retardant.
Important beters: melt flow rate: 45 g/10min density: 1.17 g/cm3 absorption rate: 0.3% molding shrinkage rate: 0.4% notched impact strength: 15 tensile strength: 54 MPa flexural strength: 85 MPa flexural modulus: 2600 MPa VEKA softening point: debation temperature of 94 DEG C heat: 79 degrees
Manufacturer: polymer Co Ltd
ABS/PC (ABS PC and /ENV15-NC250 / Enviroplas alloy #)
Usage: other
Features: low viscosity, high impact resistance
Important beters: melt flow rate: 9 g/10min density: 1.14 g/cm3 molding shrinkage rate: 0.5% notched impact strength: 640 tensile strength: 56.5 MPa elongation: 120% bending strength: 85.5 MPa flexural modulus of 2320 MPa hot debation temperature: 107 degrees
Manufacturer: American Enviroplas company
ABS/PC (ABS PC /Ultra 4105/ alloy #) Spain ELIX Polymers
Usage: other
Features: low volatility; impact resistance, high heat resistance, medium
Important beters: density: 1.07 g/cm3 bending strength: 70 MPa bending modulus: 2000 MPa
Manufacturer: ELIX Polymers, Spain
ABS/PC (ABS and PC # Lotte chemical /AF-3200/ alloy)
Usage: other
Features: high rigidity, high impact resistance, good mold release, no bromine, flame retardant
Important beters: density: 1.3 g/cm3 molding shrinkage rate: 0.1% notched impact strength: tensile strength: 93.2 MPa elongation at break: 4% bending strength: 137 MPa bending modulus: 5300 MPa thermal debation temperature: 120 C
Manufacturer: Korea Lotte Chemical Co., Ltd.
ABS/PC (ABS PC /S466/ Ravago alloy #)
Usage: other
Features: good toughness and impact resistance
Important beters: melt flow rate: 2.4 g/10min density: 1.14 g/cm3 absorption rate: 0.1% molding shrinkage rate: 0.5% notched impact strength: 690 tensile strength: 57.2 MPa elongation: 70% bending strength: 75.8 MPa flexural modulus of 2340 MPa hot debation temperature: 113 degrees
Manufacturer: Ravago USA
ABS/PC (ABS PC /055/80-GFK5/15Black91220/ Almaak alloy #) Germany
Usage: other
Important beters: density: 1.29 g/cm3 water absorption: 0.2% molding shrinkage rate: 0.3% notched impact strength: tensile strength: 65 MPa elongation at break: 4% VEKA softening point: 135 degrees C hot debation temperature: 120 C
Manufacturer: Almaak, Germany
PC/ABS (PC and ABS /CY1000 UV FR V0 BL077/ alloy) 2007.pdf
Usage: other
Important beters: density: 1.18 g/cm3 molding shrinkage: 0.2% notched impact strength: 600 tensile strength: MPa bending strength: 90 MPa bending modulus: 2300 MPa thermal debation temperature: 80 C
Manufacturer: United States PolyOne Corporation
PC/ABS (PC and ABS /CY1000 UV NHFR V0 GR723/ alloy) 2007.pdf
Usage: other
Important beters: density: 1.17 g/cm3 molding shrinkage: 0.3% notched impact strength: 550 tensile strength: MPa bending strength: 80 MPa bending modulus: 2200 MPa thermal debation temperature: 80 C
Manufacturer: United States PolyOne Corporation
