产品详情
长期供应荷兰DSM Akulon PA6 K224-PG8 价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.13 g/cc
0.0408 lb/in3
ISO 1183
Water Absorption
9.5 %
9.5 %
Sim. to ISO 62
Moisture Absorption at Equilibrium
2.5 %
2.5 %
Humidity Absorption; Sim. to ISO 62
Viscosity Test
165 cm3/g
165 cm3/g
Viscosity Number
Thermal Properties
Metric
English
Comments
CTE, linear, Parallel to Flow
90.0 μm/m-°C
@Temperature 20.0 °C
50.0 μin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
CTE, linear, Transverse to Flow
100 μm/m-°C
@Temperature 20.0 °C
55.6 μin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
Melting Point
220 °C
428 °F
10°C/min; ISO 11357-1/-3
Debive Properties
Coating
Yes
Film Extrusion
Yes
Lubricants
Yes
RSV Formic Acid
2.6 g/100ml
ISO 307
Without Fillers
Yes
其他型号参数与生产商——————————
TPE (thermoplastic elastomer) /50051/ European VTC TPE
Usage: other
Important beters: melt flow rate: 1 g/10min density: tensile strength of 0.9 g/cm3: elongation at break of 6 MPa: hardness: 6
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /50071/ European VTC TPE
Usage: other
Important beters: melt flow rate: 5 g/10min density: tensile strength of 0.9 g/cm3: elongation at break of 14 MPa: hardness: 72
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /500800/ European VTC TPE
Usage: other
Important beters: melt flow rate: 4 g/10min density: tensile strength of 0.9 g/cm3: elongation at break of 14 MPa: hardness: 90
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /500850/ European VTC TPE
Usage: other
Important beters: melt flow rate: 17 g/10min density: tensile strength of 0.9 g/cm3: elongation at break of 14 MPa: hardness: 85
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /938012/ European VTC TPE
Usage: other
Important beters: melt flow rate: 1 g/10min density: tensile strength of 0.89 g/cm3: elongation at break of 10 MPa: hardness: 65
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /DT-240/ European VTC TPE
Usage: other
Remark: high flow, low density
Important beters: density: 0.89 g/cm3 tensile strength: 20 MPa elongation at break: 850% bending modulus: MPa hardness: 48
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /G1/ European VTC TPE
Purpose: thin film, medical
Features: good sterilization, food contact compliance
Important beters:
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /653/ European VTC TPE
Purpose: thin film, medical
Features: good sterilization, food contact compliance
Important beters: density: 0.89 g/cm3 hardness: 48
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /KP/ European VTC TPE
Application: Medical
Features: good sterilization, food contact compliance
Important beters: density: 0.89 g/cm3 hardness: 46
Manufacturer: European VTC TPE group
TPE (thermoplastic elastomer) /M2/ European VTC TPE
Application: Medical
Features: good sterilization, food contact compliance
Important beters: density: 1.05 g/cm3 hardness: 45
Manufacturer: European VTC TPE group
