产品详情
长期供应荷兰DSM Akulon PA6 F136-E1价格合理,诚信经营，可全国供货（广东省内 免费送货上门）。
“十年老店，完备售后，信誉信赖” 是专业塑胶原料供应商
本司货源稳定充足，发货准时，交期和质量均有保障！
根据客户要求，可提供塑胶原料相关报告。如：ROHS(SGS)报告，UL认证，材质证明及物质安全资料表（MSDS）！
欢迎来电咨询7*24全天候服务热线：13686017791 易小姐 QQ：335171600
介绍————————
Physical Properties
Metric
English
Comments
Density
1.13 g/cc
0.0408 lb/in3
ISO 1183
Water Absorption
9.5 %
9.5 %
Sim. to ISO 62
Moisture Absorption at Equilibrium
2.5 %
2.5 %
Humidity Absorption; Sim. to ISO 62
Viscosity Test
165 cm3/g
165 cm3/g
Viscosity Number
Thermal Properties
Metric
English
Comments
CTE, linear, Parallel to Flow
90.0 μm/m-°C
@Temperature 20.0 °C
50.0 μin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
CTE, linear, Transverse to Flow
100 μm/m-°C
@Temperature 20.0 °C
55.6 μin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
Melting Point
220 °C
428 °F
10°C/min; ISO 11357-1/-3
Debive Properties
Coating
Yes
Film Extrusion
Yes
Lubricants
Yes
RSV Formic Acid
2.6 g/100ml
ISO 307
Without Fillers
Yes
其他型号参数与生产商——————————
TPE (thermoplastic elastomer) /A3-1001/ Elizabeth Foundation (GE)
Usage: other
Important beters:
Manufacturer: SABIC innovative plastics (GE)
TPE (thermoplastic elastomer) /A4-1001/ Elizabeth Foundation (GE)
Usage: other
Important beters:
Manufacturer: SABIC innovative plastics (GE)
TPE (thermoplastic elastomer) /A6-1001/ Elizabeth Foundation (GE)
Usage: other
Important beters:
Manufacturer: SABIC innovative plastics (GE)
TPE (thermoplastic elastomer) /A8-1001/ Elizabeth Foundation (GE)
Usage: other
Important beters:
Manufacturer: SABIC innovative plastics (GE)
TPE (thermoplastic elastomer) /1320P/ Japan JSR
Usage: other
Important beters: density: 1.22 g/cm3 elongation at break: 420% bending strength: 330 MPa VEKA softening point:
Manufacturer: Japan JSR Corporation
TPE (thermoplastic elastomer) /A1400/ us Comtrex
Usage: other
Important beters: melt flow rate: 5 g/10min density: 1.37 g/cm3 molding shrinkage: elongation at break: 790% hardness: 45
Manufacturer: American Comtrex company
TPE (thermoplastic elastomer) /A1602/ us Comtrex
Usage: other
Important beters: melt flow rate: 3 g/10min density: 1 g/cm3 molding shrinkage: elongation at break: 820% hardness: 71
Manufacturer: American Comtrex company
TPE (thermoplastic elastomer) /A1606/ us Comtrex
Usage: other
Important beters: melt flow rate: 3.2 g/10min density: 1 g/cm3 molding shrinkage: elongation at break: 750% hardness: 69
Manufacturer: American Comtrex company
TPE (thermoplastic elastomer) /4103/ Sweden ELASTO
Usage: other
Remark: ozone resistance of recyclable materials
Important beters: density: 1.1 g/cm3 tensile strength: 4 MPa elongation: 580% hardness: 70
Manufacturer: ELASTO, Sweden
TPE (thermoplastic elastomer) /500551/ Sweden ELASTO
Usage: other
Remark: recyclable material \ ozone resistance
Important beters: density: 0.9 g/cm3 tensile strength: 6 MPa elongation: 600% hardness: 55
Manufacturer: ELASTO, Sweden
